Phoenix ST-REL3-SG-B 24/21/P-relay connector 2824255, relay plug, installed with remanence micro switch relay, contact (AgSnO): small to large load, 1 PDT,24V DC input voltage, With reverse polarity protection and freewheeling diode, forward switch

Product Type Relay Module
Mode of operation 100% operating factor
mechanical life about 107Switch Times
insulation characteristics
Overvoltage Category II
pollution level 2
insulation characteristics: electrical clearance and creepage distance between power supply circuits
insulation Foundation Isolation
Data Management Status
Last data maintenance date 03.07.2025

rated conditions 0.19W
test voltage (coil/contact) 2 kVrms(50Hz,1 min, coil/contact)
Rated insulation voltage 250V AC
Rated overvoltage 2.5 kV

coil side
Rated input voltage UN 24V DC
Input Voltage Range 19.2V DC ... 26.4V DC (20 °C)
drives and functions bistability
drive (polarity) polarization
UN Typical 8 mA
Typical Response Time 5 ms
Typical release time 5 ms
Pulse Time Range 30 ms ... 5 s
coil voltage 24V DC
protection circuit backup diode; freewheeling diode
polarity protection; polarity protection diode

switching
Contact Type 1 changeover contact
Switch Contact Type single contact
Contact Material AgSnO
maximum switching voltage 250V AC/DC
Minimum Switching Voltage 5V (5 V)
24V (24 V)
limit continuous current 6 A
Maximum impact current 8 A
minimum switching current 1 mA (24 V)
100 mA (5 V)
Maximum power rating (resistive load) 144W (24V DC)
43W (available for 48V DC)
42W (available for 60V DC)
55W (available for 110V DC)
100W (available for 220V DC)
1500 VA (available for 250V AC)
switching: when the gold plating layer is destroyed
limit continuous current 6 A
Maximum power rating (resistive load) 120W (24V DC)
40W (available for 48V DC)
35W (available for 60V DC)
30W (available for 110V DC)
60W (available for 220V DC)

width 20.8mm
height 33mm
depth 66.5mm
2911728

Phoenix ST-REL3-SG-B 24/21/P-Relay Connector 2824255

Product Center

PRODUCT CENTER