Phoenix TMC 1 F 1 100 2,0A-thermal magnetic equipment circuit breaker 0914099, thermal magnetic equipment circuit breaker, 1-position, wiring method: screw connection, rated current: 2 A, trigger characteristic: F1 (fast blowing), fuse type: automatic equipment, installation method: DIN rail: 35mm, rated current: 2 A
| Product Type |
Thermomagnetic Equipment Circuit Breaker |
| Product Series |
TMC |
| type |
rail mounting module, monolithic |
| Bits |
1 |
| connection quantity |
4 |
| Rows |
2 |
| Channels |
1 |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
2 |
| Fuse Type |
automatic equipment |
| Overview |
| Rated voltage |
65V DC |
| Nominal operating current IN |
2 A |
| Rated overvoltage |
2.5 kV |
| Insulation resistance Riso |
> 100 MΩ (500V DC) |
| auxiliary circuit |
240V AC / 1 A (low inductance) |
| 65V AC / 1 A (low inductance) |
| Breaking method |
TM (Thermomagnetic) |
| Device Impedance |
0.42 Ω |
| Rated short-circuit switching capacity Icn |
2500 A (32V DC) |
| Short-circuit switch capacity |
2000 A (UL 1077: 65V DC) |
| dielectric strength |
3000V AC (operating area) |
| 3000V AC (main circuit to auxiliary circuit) |
| Maximum switching times |
10000 (1 x In, inductive) |
| Fuse |
F1 (fast fuse) |
| Contact Type |
1 N/O contact |
| indicator/remote signaling |
| Connection Name |
auxiliary contact |
| Nominal operating voltage |
250V AC |
| 65V DC |
| Operating current |
2 A AC (low inductance) |
| Main Contacts |
| Connection Mode |
screw connection |
| thread |
M3 |
| Tightening torque |
0.6 ... 0.8 Nm |
| stripping length |
12mm |
| plug gauge |
A3 |
| Rigid conductor cross section |
0.2 mm² ... 6 mm² |
| cross-section AWG |
24 ... 10 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.2 mm² ... 4 mm² |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.25 mm² ... 4 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.25 mm² ... 2.5 mm² |
| 2 wires of the same cross section, rigid wire |
0.2 mm² ... 0.75 mm² |
| 2 wires with the same cross section, flexible wire |
0.2 mm² ... 0.75 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
0.25 mm² ... 1 mm² |
| 2 wires with the same cross section, flexible, with TWIN sleeve and plastic sleeve |
0.5 mm² ... 2.5 mm² |
| Nominal current |
2 A |
| auxiliary contact |
| Connection Mode |
screw connection |
| thread |
M3 |
| Tightening torque |
0.6 ... 0.8 Nm |
| stripping length |
12mm |
| plug gauge |
A1 |
| Rigid conductor cross section |
0.2 mm² ... 2.5 mm² |
| cross-section AWG |
24 ... 14 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.2 mm² ... 1.5 mm² |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.25 mm² ... 2.5 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.25 mm² ... 1.5 mm² |
