Phoenix C- UFB- 5DC/E 75-surge protector 2763604, surge protection plug, with thick/thin surge protection function, used for coaxial signal interface with floating ground shield, signal voltage 5V. Connection: BNC hole/pin connector

Product Type Transceiver System
IEC Category C2
C3
D1
type Protection Adapter
Surge protection fault alarm None

Connection Mode BNC 75 Ω

width 25.4mm
height 25.4mm
depth 93mm

color black (RAL 9005)
Shell Material Aluminum

Mechanical parameters
Open Side Panel No

movement direction Line-Shield/Earth Ground
Maximum continuous operating voltage UC 5V DC
Rated current 185 mA (25°C)
UC, the effective working current IC ≤ 300 µA
Residual Flow IPE ≤ 2 µA
Rated discharge current In(8/20)& micro;s (core-ground) 10 kA
Nominal discharge current In(8/20)& micro;s (core/shield) 10 kA
Total discharge current ITotal(8/20) µs 20 kA
Output voltage limit 1 kV/& micro;s (core-ground) peak ≤ 500V
Output voltage limit 1 kV/& micro;s (core-shield) peak ≤ 35V
output voltage limit 1 kV/& micro;s (core-shield) static ≤ 15V
In(wire-shield) ≤ 12V
voltage protection level Up(line-ground) ≤ 500V (C1 - 1 kV / 500 A)
≤ 500V (C3 - 10 A)
voltage protection level Up(core-shield) ≤ 25V (C3 - 10 A)
≤ 55V (C1 - 1 kV / 500 A)
response time tA (core-ground) ≤ 100 ns
response time tA (core-shield) ≤ 500 ns
input attenuation AE, asymmetric. 1.3 dB (≤ 5 MHz)
cutoff frequency fg(3 dB), asymmetric. (shielded) in a 50 Ω system 80 MHz typical
Surge protection fault alarm None
Impact resistance (line-ground) C2 - 10 kV / 5 kA
D1 - 2.5 kA

environmental conditions
protection level IP20
ambient temperature (operation) -40°C ... 80°C

electrical clearance and creepage distance
Standards/Regulations VDE 0110-1 / IEC 60664-1
Standard Information Technology Specification
Standards/Regulations IEC 61643-21
IEC 61643-21
Standards/Specifications IEC 61643-21
Considerations 2000

Installation Type special connection
2858991

Phoenix C- UFB- 5DC/E 75-Surge Protector 2763604

Product Center

PRODUCT CENTER