Phoenix PT 1X2-24DC/FM-ST-surge protector-plug-in 2920078, surge protection plug, with diagnostic function, status display and remote indication contact, used for protection of two-wire floating ground signal circuit.
| Product Type | measurement and control technology |
| Product Series | PLUGTRAB PT |
| IEC Category | C1 |
| C2 | |
| C3 | |
| D1 | |
| VDE requirement level | C1 |
| C2 | |
| C3 | |
| D1 | |
| type | needle type |
| Line pairs per module | 1 |
| insulation characteristics | |
| pollution level | 2 |
| Rated voltage UN | 24V DC |
| indicator/remote signaling | |
| switching function | normally closed contact |
| Maximum operating voltage Umax.AC | 250V AC |
| Maximum operating current Imax | 0.2 A (250V AC) |
| 0.2 A (220V DC) | |
| 1 A (60V AC) | |
| 1 A (60V DC) | |
| Connection Mode | screw connection (connection to the base) |
| thread | M3 |
| Tightening torque | 0.8 Nm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 17.7mm |
| height | 45mm |
| depth | 52mm |
| Horizontal stitch pitch | 1 Partition |
| full module width | 17.7mm |
| Full module height | 90mm |
| full module depth | 65.5mm |
| color | black (RAL 9005) |
| flame retardant rating, according to UL 94 | V-0 |
| Shell Material | PA 6.6 |
| Mechanical parameters | |
| Open Side Panel | No |
| movement direction | Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground |
| Maximum continuous operating voltage UC | 28V DC |
| 20V AC | |
| Rated current | 450 mA (45°C) |
| UC, the effective working current IC | ≤ 5 µA |
| Standby power consumption PC | ≤ 1.78 VA |
| Residual Flow IPE | ≤ 2 & micro;A (direct grounding) |
| ≤ 1 & micro;A (with PT 1X2 F-BE) | |
| Nominal discharge current In(8/20) & micro;s (core-core) | 10 kA |
| Rated discharge current In(8/20)& micro;s (core-ground) | 10 kA |
| pulse discharge current Iimp(10/350) µs | 2.5 kA |
| Total discharge current ITotal(8/20) µs | 20 kA |
| Maximum discharge current Imax(8/20) & micro;s (core-core) | 10 kA |
| Maximum discharge current Imax(8/20) & micro;s (core-ground) | 10 kA |
| rated power pulse current lan (1000)& micro;s (core-core) | 33 A (25 °C) |
| Output voltage limit 1 kV/& micro;s (core-to-core) peak | ≤ 45V |
| Output voltage limit 1 kV/& micro;s (core-ground) peak | ≤ 450V |
| ≤ 1 kV (with PT 1X2 F-BE) | |
| Output voltage limit 1 kV/& micro;s (core-core) static | ≤ 40V |
| Residual voltage ln,(wire-wire) | ≤ 40V |
| Residual voltage lan(10/1000)& micro;s (wire-wire) | ≤ 50V |
Phoenix PT 1X2-24DC/FM-ST-Surge Protector-Plug 2920078
