Phoenix SAC-17P-MR/ 1,5-PVC SCO-sensor/actuator cable 1555305, sensor/actuator cable, 17-position, PVC, black RAL 9005, plug elbow M12 SPEEDCON, code: A, with free outlet, cable length: 1.5 m
| Product Type |
Sensor/Actuator Cable |
| Application |
standard |
| Bits |
17 |
| Outlet No. |
1 |
| Shielding |
None |
| coding |
A |
| insulation characteristics |
| Overvoltage Category |
II |
| pollution level |
3 |
| flame retardant rating to UL 94 |
HB |
| Fixture body material |
TPU, high flame retardancy, with self-extinguishing properties |
| Contact Material |
CuZn |
| Material Contact Surface |
Ni/Au |
| Contact Carrier Material |
TPU GF |
| screw connection material |
zinc cast, nickel plated |
| insulation resistance |
≥ 100 MΩ |
| Rated voltage UN |
30V AC |
| 30V DC |
| Rated current IN |
1.5 A |
| Status Display |
None |
| Status Display |
No |
| Wire Connection |
| Tightening torque |
0.4 Nm (M12 plug connector) |
| connection 1 |
| type |
plug elbow M12 SPEEDCON |
| Bits |
17 |
| Lock Type |
SPEEDCON |
| Error-proofing code type |
A |
| Connection 2 |
| type |
Free Outlet |
| Cable Length |
1.5 m |
| PVC black [PVC] |
| Dimensional drawing |
|
| Bits |
17 |
| Shielding |
None |
| Cable Type |
PVC black [PVC] |
| wire structure signal line |
18x 0.10mm |
| AWG, signal wire |
26 |
| Wire Cross Section |
17x 0.14 mm² (signal line) |
| wire diameter, including insulation |
1 mm ± 0.05mm (signal line) |
| Cable outer diameter |
6.80mm |
| outer sheath, material |
PVC |
| outer sheath, color |
Black RAL 9005 |
| Wire Material |
copper stranded wire |
| wire insulation material |
PVC |
| single line, color |
white, brown, green, yellow, gray, pink, blue, red, black, purple, gray-pink, red-blue, white-green, brown-green, white-yellow, yellow-brown, white-gray |
| Total Strand |
multilayer 17 strand |
| Maximum conductor resistance |
≤ 142 Ω/km (at 20°C) |
| insulation resistance |
> 10 MΩ*km |
| Rated voltage, cable |
250V |
| Core test voltage/core |
1500V AC |
| minimum bending radius, fixed mounting |
34mm |
| minimum bending radius, mobile installation |
102mm |
| flame retardant |
DIN EN 50265-2-1 |
| ambient temperature (operation) |
-25°C ... 80°C (cable, fixed installation) |
| -5°C ... 80°C (cable, movable installation) |
| environmental conditions |
| protection level |
IP65 |
| IP67 |
| IP68 |
| Ambient temperature (operating) (hole connector/pin connector) |
-25°C ... 85°C (Surge protector-plug) |
| Ambient temperature (operating) (cable, fixed installation) |
-5°C ... 80°C (cable, movable installation) |
| ambient temperature (operating) (cable, movable installation) |
-25°C ... 80°C (cable, fixed installation) |
