Phoenix PT 2X1-VF-230AC-ST surge protector-plug-in 2921365, protect the protection circuit of the plug without leakage current, used for the protection of 2 floating ground signals. In series in the system, a varistor and a gas discharge tube are installed between the signal line and the ground line.
| Product Type | measurement and control technology |
| Product Series | PLUGTRAB PT |
| IEC Category | C1 |
| C2 | |
| C3 | |
| D1 | |
| type | needle type |
| Bits | 2 |
| Surge protection fault alarm | None |
| Rated voltage UN | 230V AC |
| indicator/remote signaling | |
| switching function | normally closed contact |
| Connection Mode | screw connection (connection to the base) |
| thread | M3 |
| Tightening torque | 0.8 Nm |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Attachable Guide Cross Section AWG | 24 ... 12 |
| Dimensional drawing | |
| width | 17.5mm |
| height | 44.8mm |
| depth | 51.7mm |
| Horizontal stitch pitch | 1 Partition |
| full module width | 17.7mm |
| Full module height | 90mm |
| full module depth | 65.5mm |
| color | black (RAL 9005) |
| flame retardant rating, according to UL 94 | V-0 |
| Shell Material | PA 6.6 |
| Mechanical parameters | |
| Open Side Panel | No |
| movement direction | Line-Line & Line-Earth Ground |
| Maximum continuous operating voltage UC | 250V AC |
| Rated current | 6 A |
| UC, the effective working current IC | ≤ 2 µA |
| Residual Flow IPE | ≤ 2 µA (UN) |
| Nominal discharge current In(8/20) µs | 3 kA |
| pulse discharge current Iimp(10/350) µs | 500 A |
| Total discharge current ITotal(8/20) µs | 8 kA |
| Total discharge current ITotal(10/350) µs | 1 kA |
| Maximum discharge current Imax(8/20)µs | 8 kA |
| rated power pulse current lan (1000)& micro;s (core-ground) | 100 A |
| Output voltage limit 1 kV/& micro;s (core-ground) static | ≤ 1.4 kV |
| Residual voltage ln,(wire-wire) | ≤ 2 kV |
| Residual voltage ln,(wire-ground) | ≤ 1 kV |
| Residual voltage lan(10/1000)& micro;s (wire-wire) | ≤ 1.4 kV |
| Ian(10/1000)& micro; Residual pressure at s (line-ground) | ≤ 700V |
| Maximum absorbed energy (2 ms) | 150 J |
| voltage protection level Up(core-core) | ≤ 2.5 kV (C2 - 4 kV / 2 kA) |
| ≤ 1.8 kV (C3 - 100 A) | |
| ≤ 2.6 kV (D1 - 500 A) | |
| voltage protection level Up(line-ground) | ≤ 1.1 kV (C1 - 500 A) |
| ≤ 1.5 kV (C2 - 4 kV / 2 kA) | |
| ≤ 1.6 kV (C3 - 100 A) | |
| ≤ 1.8 kV (D1 - 500 A) | |
| response time tA | ≤ 100 ns |
| capacitance (core-core) | Typical 1.5 pF |
| capacitance (core-ground) | Typical 3 pF |
| the resistance of each path | 0 Ω |
| Surge protection fault alarm | None |
| 6 A (gL/gG) | |
| Impact resistance (line-ground) | C2 - 4 kV / 2 kA |
| C3 - 100 A | |
| D1 - 500 A |
Phoenix PT 2X1-VF-230AC-ST-Surge Protector-Plug and Plug 2921365
