Phoenix REL-PR1-110DC/1/MB-single relay 2908044, plug-in high-power relay with power contacts, dedicated to switching high DC loads, 1 normally open contact, arc extinguishing magnet, coil voltage: 110V DC
Product Type
Single relay
Mode of operation
100% operating factor
mechanical life
about 2x 107 times
insulation characteristics
Overvoltage Category
III
pollution level
3
Data Management Status
Last data maintenance date
25.08.2025
Electrical characteristics
service life, electrical
See Graph
rated conditions
1.65W
test voltage (coil/contact)
2.5 kV (50Hz,1 min, coil/contact)
Rated overvoltage
4 kV
input data
coil side
Rated input voltage UN
110V DC
Input Voltage Range
93.5V DC ... 121V DC
to UN as reference
See Graph
drives and functions
monostable
drive (polarity)
Inpolarity
UN
15 mA
Typical Response Time
20 ms
Typical release time
15 ms
Output Data
switching
Contact Type
1 N/O contact
Switch Contact Type
single contact
Contact Material
AgNi
maximum switching voltage
440V AC
250V DC
Minimum Switching Voltage
5V (when 24 mA)
limit continuous current
16 A
Maximum impact current
50 A (20 ms)
30 A (4 s)
minimum switching current
5 mA (24 V)
Maximum power rating (resistive load)
384W (24V DC)
744W (available for 48V DC)
900W (available for 60V DC)
1540W (available for 110V DC)
2640W (available for 220V DC)
4000 VA (available for 250V AC)
Minimum on-off capacity
120 mW
switch capacity
1 A (220 V,DC13)
1.5 A (240 V,AC15)
16 A (24V DC,L/R = 40 ms)
12 A (48V DC,L/R = 40 ms)
9.5 A (60V DC,L/R = 40 ms)
5.4 A (110V DC,L/R = 40 ms)
3 A (220V DC,L/R = 40 ms)
2.7 A (250V DC,L/R = 40 ms)
connection data
Connection Mode
in-line connection
Dimensions
width
38.6mm
height
36.1mm
depth
45.5mm
