Phoenix SCX 2POE 2LX-Industrial Ethernet Switch 1108543,Smart Ethernet Box, used to connect to power-over-Ethernet terminal equipment, with 2 power-over-Ethernet ports, 2 upstream ports (SFP slots), integrated management switch, Surge protector and optical fiber distribution tray, power supply voltage 100 ... 240V AC, wall-mounted or pole-mounted
width
284mm
height
364mm
depth
121mm
Application Description
Application Description
for industrial applications only
color (shell)
light gray (RAL 7035)
Identification Material (Shell)
polycarbonate
Identification material (cable joint)
Nylon
Identification Material (Cable Joint Seals)
Neoprene
flame retardant rating, according to UL 94
V0 (shell, vertically clamped sample extinguishes within 10 seconds, no droplets of molten plastic, smoldering time up to 60 seconds)
V2 (cable joint; vertically stretched sample extinguishes within 30 seconds; burning droplets are allowed)
Installation Type
Wall Mount
mast installation
basic functions
store-and-forward switch, compliant with IEEE 802.3
data: Ethernet/Fast Ethernet/Gigabit Ethernet
transmission speed
10/100/1000 Mbps
Connection Mode
RJ45 female connector
Connection Method Considerations
Adaptive and Self-Crossover
Channels
2 (RJ45 PoE port)
Transmission Length
100 m (per segment)
transmission medium
copper cable
Maximum output power
165W (>55°C attenuation, see data sheet)
155W (> 55 C attenuation if switch output is active)
90W (POE1/2 per port,>50°C attenuation, see data sheet)
data: Ethernet/Fast Ethernet/Gigabit Ethernet
transmission speed
100/1000 Mbps (depending on SFP module used)
Connection Mode
SFP
Connection Method Considerations
SFP modules are available as accessories
Channels
2 (SFP port)
Transmission Length
< 80 km (depends on the SFP module used)
transmission medium
depends on the SFP module used
data: configuration interface
Connection Mode
RJ45 female connector
Channels
1 (RJ45 port)
data: switch output
Connection Mode
In-line spring connection
Channels
1 (in-line technology)
single wire/wiring point, rigid
0.2 mm² ... 1.5 mm²
single wire/wiring point, flexible
0.2 mm² ... 1.5 mm²
Flexible conductor cross-section, with sleeve, with plastic insulation sleeve
0.25 mm² ... 0.75 mm² (stripping length 8mm)
flexible conductor cross-section with cold press head without insulation sleeve
0.25 mm² ... 1.5 mm² (stripping length 8mm)
AWG stranded wire, flexible
16
AWG Wire Minimum Cross Section, Flexible
24
stripping length
10mm
load/output load current output
non-inductive load
Rated output voltage
24V DC ± 10% (power supply for devices in Smart Ethernet Box)
output current
300 mA (typical)
Product Type
Switch
Product Series
Smart Ethernet Box
MTTF
547 years (SN 29500 standard, temperature 25°C, duty cycle 21%)
272 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%)
113 years (SN 29500 standard, temperature 40°C, duty cycle 100%)
basic functions
store-and-forward switch, compliant with IEEE 802.3
insulation characteristics
protection level
I (protective grounding of all conductive housing parts)
insulation characteristics
Overvoltage Category
III (protection module inserted)
II (without protection module)
pollution level
2
Switch Features
diagnostic function
RMON History
LLDP (Link Layer Discovery Protocol)
SNMP Trap
N:1-Portmirroring
ACD (Address Conflict Detection)
basic functions
store-and-forward switch, compliant with IEEE 802.3
