Phoenix UK 16-straight-through terminal 3006014, straight-through terminal, nominal working voltage: 800V, rated current: 76 A, connection quantity: 2, connection mode: screw connection, cross section: 0.5 mm2 -16mm2, installation mode: NS 35/7,5, NS 35/15, NS 32, color: gray
| Product Type |
straight-through terminal |
| Product Series |
UK |
| connection quantity |
2 |
| Rows |
1 |
| potential |
1 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
8 kV |
| rated conditions |
0W |
| the number of connections per layer |
2 |
| Layer 1 Upper 1 Lower 1 |
| thread |
M4 |
| Tightening torque |
1.5 ... 1.8 Nm |
| stripping length |
11mm |
| plug gauge |
B6 |
| connection meets standards |
IEC / EN |
| Rigid conductor cross section |
0.5 mm² ... 16 mm² |
| cross-section AWG |
20 ... 6 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.5 mm² ... 10 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
20 ... 8 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.5 mm² ... 10 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.5 mm² ... 10 mm² |
| 2 wires of the same cross section, rigid wire |
0.5 mm² ... 4 mm² |
| 2 wires with the same cross section, flexible wire |
0.5 mm² ... 4 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
0.5 mm² ... 4 mm² |
| 2 wires with the same cross section, flexible, with TWIN sleeve and plastic sleeve |
0.5 mm² ... 6 mm² |
| Nominal current |
76 A |
| Rated voltage |
800V |
| connection meets standards |
UL |
| cross-section AWG |
24 ... 6 (as amended by IEC standards) |
| Nominal current |
65 A |
| Rated voltage |
600V |
| connection meets standards |
CSA |
| cross-section AWG |
24 ... 6 (as amended by IEC standards) |
| Nominal current |
80 A |
| Rated voltage |
600V |
| width |
10.2mm |
| End plate width |
1.5mm |
| height |
42.5mm |
| NS 32 Depth |
59mm |
| NS 35/7,5 depth |
54mm |
| NS 35/15 Depth |
61.5mm |
| color |
gray (RAL 7042) |
| flame retardant rating, according to UL 94 |
V2 |
| Insulation Material Group |
I |
| insulation material |
PA |
| insulating materials (DIN EN 60216-1(VDE 0304-21)) |
125°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
125°C |
| Surge Voltage Test |
| Test voltage setpoint |
9.8 kV |
| Results |
has passed the test |
