Phoenix UT 2,5-3L-multilayer terminal 3214259, multilayer terminal, nominal working voltage: 500V, rated current: 19 A, wiring method: screw connection, rated wiring capacity: 2.5 mm2, cross section: 0.14 mm2 -4mm2, installation method: NS 35/7,5, NS 35/15, color: gray
| Product Type |
multilayer terminal |
| product series |
UT |
| Bits |
1 |
| connection quantity |
6 |
| Rows |
3 |
| potential |
3 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
6 kV |
| rated conditions |
0.77W |
| the number of connections per layer |
2 |
| Rated cross section |
2.5 mm² |
| Rated wiring capacity AWG |
12 |
| 1 2 3 layer |
| thread |
M3 |
| Tightening torque |
0.5 ... 0.6 Nm |
| stripping length |
9mm |
| plug gauge |
A3 |
| connection meets standards |
IEC 60947-7-1 |
| Rigid conductor cross section |
0.14 mm² ... 4 mm² |
| cross-section AWG |
26 ... 12 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.14 mm² ... 4 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
26 ... 12 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.14 mm² ... 2.5 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.14 mm² ... 2.5 mm² |
| Nominal current |
19 A (with 2.5 mm² lead wiring capacity) |
| Maximum load current |
24 A (When the cross-sectional area of the connected wires is 4 mm², the total current of all connected wires cannot exceed the maximum load current.) |
| Rated voltage |
500V |
| Considerations |
Note: Product release, wiring capacity, and notes on aluminum wire connections can be found in the download area. |
| Rated cross section |
2.5 mm² |
| connection meets standards |
IEC/EN 60079-7 |
| Rigid conductor cross section |
0.14 mm² ... 4 mm² |
| cross-section AWG |
26 ... 12 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.14 mm² ... 2.5 mm² |
| Maximum load current |
28 A (when connecting a conductor with a cross-sectional area of 4 mm²) |
| 22 A (with 2.5 mm² lead wiring capacity) |
| Rated voltage |
690V |
| Rated cross section |
4 mm² |
| width |
5.2mm |
| End plate width |
2.2mm |
| height |
90mm |
| NS 35/7,5 depth |
77.5mm |
| NS 35/15 Depth |
85mm |
| color |
gray (RAL 7042) |
| flame retardant rating, according to UL 94 |
V0 |
| Insulation Material Group |
I |
| insulation material |
PA |
| Application of Static Insulation Materials at Low Temperature |
-60°C |
| insulating materials (DIN EN 60216-1(VDE 0304-21)) |
130°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
130°C |
| railway vehicles (DIN EN 45545-2) R22 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R23 |
HL 1 - HL 3 |
| railway vehicles (DIN EN 45545-2) R24 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R26 |
HL 1 - HL 3 |
