Phoenix AXL F DI32/1 1F-digital quantity module 2688035,Axioline F, digital quantity input module, digital input: 32,24V DC, connection technology: 1-wire system, local bus transmission rate: 100 Mbps, protection level: IP20, including bus basic module and Axioline F connector
width
53.6mm
height
126.1mm
depth
54mm
Notes on dimensional data
using TH 35-7.5 rails (as EN60715).
Application Description
Application Description
for industrial applications only
Axioline F Local Bus
interfaces
2
Connection Mode
Bus Base Module
transmission speed
100 Mbps
Module
Input Address Area
4 Byte
Output Address Area
0 Byte
the required parameter data
3 Byte
the required configuration data
6 Byte
digital quantity:
Enter Name
Digital Input
Input Description
EN 61131-2 types 1 and 3
Input Quantity
32
Connection Mode
in-line connection
connection system
1 Wire
input voltage range, "0" signal
-3V DC ... 5V DC
input voltage range, "1" signal
11V DC ... 30V DC
Rated input voltage UIN
24V DC
Rated input current UIN
2.4 mA
input filter time
3000 & micro;s (default (value))
1000 µs
< 100 µs
protection circuit
input polarity protection against reverse connection; shunt diode (30V,5 s)
Product Type
I/O components
Product Series
Axioline F
type
Modular structure
Installation position
any position (no temperature decay)
Scope of supply
includes bus base module and Axioline F connector
insulation characteristics
Overvoltage Category
II (IEC 60664-1,EN 60664-1)
pollution level
2 (IEC 60664-1,EN 60664-1)
rated conditions
3.65W
potential: Axioline F local bus (UBus) power supply
supply voltage
5V DC (via bus base module)
current consumption
Maximum 120 mA (up to HW04)
Maximum 60 mA (from HW 05)
potential: feeding the digital input module (UI)
supply voltage
24V DC
Supply Voltage Range
19.2V DC ... 30V DC (includes all tolerances, including ripple)
current consumption
max. 50 mA
protection circuit
surge protection; electronic (35V, 0.5 s)
polarity protection; shunt diode with external 5 A fuse (for commissioning only)
electrical isolation/isolation for voltage range
test voltage: 5V local bus power supply (UBus)/24V supply (I/O)
500V AC, 50 Hz, 1 min
test voltage: 5V local bus power supply (UBus)/Functional Grounding
500V AC, 50 Hz, 1 min
test voltage: 24V supply (I/O)/function ground
500V AC, 50 Hz, 1 min
2688051
넳넲
Phoenix AXL F DI32/1 1F-Digital volume module 2688035
