Phoenix ILC 191 ETH 2TX-controller 2700976,Inline controller can communicate via PROFINET and Modbus/TCP. Programming can be done using PC Worx Express or PC Worx (IEC 61131-3).
| Product Type | controller |
| product series | Inline-Controller |
| type | Module |
| Display | |
| Diagnostic Display | No |
| Processor | AlteraNios® II 64 MHz |
| clock frequency | 64 MHz |
| reserved data storage | 48 kilobytes kByte (NVRAM) |
| IEC 61131 runtime system | |
| Program Memory | 1 Mbyte |
| data storage system | 1 Mbyte |
| control tasks | 8 |
| INTERBUS-Master | |
| Process Data Volume | maximum 4096 bits (INTERBUS) |
| maximum 128 | |
| the number of local bus devices that can be connected | max. 63 (note current loss) |
| the number of devices with parameter channels | maximum 24 |
| maximum 3 | |
| Modbus/TCP-Client | |
| Process Data Volume | maximum 32768 bits (internal Modbus/TCP client) |
| the number of Modbus/TCP clients | Max 16 above FW 4.42 |
| PROFINET | |
| Device Features | PROFINET equipment |
| Specification | 2.2 |
| Vendor ID | 00B0hex/ 176dez |
| Function | |
| Diagnostic Display | No |
| redundancy function | No |
| safety function | No |
| Function | |
| Supported Programming Languages | Instruction List (IL) |
| Symbolic Flowchart (SFC) | |
| Ladder Diagram (LD) | |
| Function Block Chart (FBD) | |
| Structure Text (ST) | |
| System Requirements | |
| Engineering Design Tools | PC Worx |
| PC Worx Express | |
| Configuration Tool | Config + version 1.01 or higher |
| Diagnostic Tools | DIAG+ |
| runtime system | eCLR |
| Application Interface | OPC |
| transmission medium | copper cable |
| Real Time Clock | |
| Real Time Clock | is |
| Real Time Clock Description | integrated (buffered rechargeable battery) |
| potential: 24V power supply UILC | |
| supply voltage | 24V DC-15%/+ 20% (conforming to EN 61131-2) |
| Supply Voltage Range | 19.2V DC ... 30V DC |
| current consumption | 80 mA (no I/O module connected) |
| potential: 7.5V communication power UL(potential jumper) | |
| supply voltage | 7.5V DC ±5% |
| potential: 24V analog power supply UANA(potential jumper) | |
| supply voltage | 24V DC -15 % / +20% |
| Supply Voltage Range | 19.2V DC ... 30V DC (includes all tolerances, including ripple) |
| potential: 24V main supply UM | |
| supply voltage | 24V DC-15%/+ 20% (conforming to EN 61131-2) |
| Supply Voltage Range | 19.2V DC ... 30V DC (includes all tolerances, including ripple) |
| current consumption | Max. 8 A DC |
| 6 mA (without sensor) | |
Phoenix ILC 191 ETH 2TX-Controller 2700976
