Phoenix IBS IL 24 BK-T/U-PAC-bus coupler 2861580,Inline, bus coupler, INTERBUS,Inline shielded connector, local bus transmission rate: 500 kBit/s, protection level: IP20, including Inline connector And marker strip
width
48.8mm
height
135mm
depth
71.5mm
Application Description
Application Description
for industrial applications only
Use Restrictions
CCCex Description
is not permitted in China for use in potentially explosive areas.
INTERBUS
interfaces
2
Connection Mode
Inline Shielded Connector
transmission speed
500 kBit/s
transmission principle
copper cable
Remote Bus Branch/Inline Local Bus
interfaces
1
Connection Mode
Inline data span block
transmission speed
500 kBit/s
System Limitations
maximum 63
the number of local bus devices that can be connected
maximum 63
the number of devices with parameter channels
maximum 62
maximum 15
Module
ID Code (dec.)
04
Hex ID Encoding
04
Length Encoding (Hexadecimal)
00
length encoding (decimal)
00
Process Data Channel
0 bit
Input Address Area
0 bit
Output Address Area
0 bit
Register Length
0 bit
Product Type
I/O components
Product Series
Inline
type
Module
Scope of supply
includes Inline connector and marker strip
diagnostic information
peripheral fault is true, if no segment voltage US
insulation characteristics
Overvoltage Category
II (IEC 60664-1,EN 60664-1)
pollution level
2 (IEC 60664-1,EN 60664-1)
rated conditions
3W
protection circuit
communication power short circuit protection; electronic
Analog Power Short Circuit Protection; Electronic
Surge protection (segmented power supply, main power supply, bus coupler power supply); input protection diode (such as long-term overload will be damaged) input protection diode can be up to 1500W pulse load short-circuit.
polarity protection (segment power supply/main power supply); parallel diode to prevent reverse polarity; when an error occurs, high current through the diode will cause the upstream fuse to blow.
Reverse polarity protection (bus coupler power supply); series diodes are located on the guide path of the power supply unit; when a fault occurs, only low current is generated. When a fault occurs, the external power supply unit has no fuse to blow.
