Phoenix QUINT4-INV/24DC/1AC/600VA/USB-AC/DC inverter 1067325,QUINT INVERTER, DIN rail installation, input: 24V DC, output: 1AC/600 VA, pure sine wave.
| input voltage | 24V DC |
| DC input voltage range | 20V DC ... 30V DC |
| power consumption | Typical 23 A |
| 28 A max. |
| efficiency | > 86 % (120V AC) |
| > 87 % (230V AC) | |
| output voltage | 120V AC ±2 % (100V AC / 6 A...130 V AC / 4,6 A) |
| 230V AC ±2 % (200V AC / 3 A...240 V / 2,5 A) | |
| Output Voltage Shape | pure sine wave |
| Rated output current (IN) | 5 A (120V AC) |
| 2.6 A (230V AC) | |
| maximum no-load power consumption | Typical 21W (120V AC) |
| Typical 21W (230V AC) | |
| Maximum rated load power loss | Typical 72W (120V AC) |
| Typical 66W (230V AC) | |
| Rated output frequency | 60Hz 50Hz ± 0.5% |
| Attenuation | 50°C ... 60°C (2.5 %/K) |
| apparent power | 600 VA |
| Active power | 480W |
| power factor (cos phi) | 0.8 |
| amplitude factor | 2.8 |
| Total Harmonic Distortion Factor (THD) | <3% (linear load) |
| <8% (non-linear load) | |
| and connect | yes. |
| maximum 3 | |
| Concatenation | No |
| Overload Mains Operation | 105 % (permanent) |
| 120... 150% (20 s / 5 s then off) | |
| Electronic current limit | > 2.5 x IN(> 200 ms) |
| Input | |
| Location | 1.x |
| Wire Connection | |
| Connection Mode | screw connection |
| Rigidity | 0.2 mm² ... 6 mm² |
| flexibility | 0.2 mm² ... 4 mm² |
| flexible strip cold press head without plastic sleeve | 0.2 mm² ... 4 mm² |
| flexible strip cold press head with plastic sleeve | 0.2 mm² ... 4 mm² |
| Rigid (AWG) | 30 ... 10 |
| stripping length | 8mm |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Screw head drive mode | slotting L |
| Output | |
| Location | 2.x |
| Wire Connection | |
| Connection Mode | screw connection |
| Rigidity | 0.2 mm² ... 6 mm² |
| flexibility | 0.2 mm² ... 4 mm² |
| flexible strip cold press head without plastic sleeve | 0.2 mm² ... 4 mm² |
| flexible strip cold press head with plastic sleeve | 0.2 mm² ... 4 mm² |
| Rigid (AWG) | 30 ... 10 |
| stripping length | 8mm |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Screw head drive mode | slotting L |