Phoenix QUINT4-ORING/12-24DC/2X20/2X20-Redundant module 1088207, active redundant module QUINT ORING adopts decoupling MOSFET, ACB Technology, DIN rail installation, 12V DC ... 24V DC, 2x 20 A, 2x 20 A
| Rated input voltage range | 12V DC ... 24V DC |
| Input Voltage Range | 8V DC ... 29.5V DC |
| Supply Voltage | DC |
| Rated input current (IN) | 2x 20 A |
| Static Boost (IStat.Boost) | 2x 25 A |
| Dynamic Boost (IDyn.Boost) | 2x 30 A (5 s) |
| selective fusing (ISFB) | 2x 120 A (15 ms) |
| prevents polarity reversal | <is 60V DC |
| required column name input protection circuit breaker | 60V DC |
| 16 A (features B, C) | |
| voltage drop, input/output | typical value 0.1V (IOUT= 20 A) |
| efficiency | Typical 98.5 % (12V DC) |
| Typical 99% (24V DC) | |
| Rated output voltage | UIn- 0.1V |
| Rated output current (IN) | 2x 20 A |
| 1x 40 A | |
| Static Boost (IStat.Boost) | 2x 25 A |
| 1x 50 A | |
| Dynamic Boost (IDyn.Boost) | 2x 30 A (5 s) |
| 1x 60 A (5 s) | |
| selective fusing (ISFB) | 2x 120 A (15 ms) |
| 1x 240 A (15 ms) | |
| Concatenation | No |
| feedback voltage resistance | ≤ 32V DC |
| output | ≤ 32V DC |
| Maximum rated load power loss | 11.7W (IOUT= 40 A) |
| 12.7W (IOUT= 40 A) |
| Input | |
| Location | 1.x |
| Wire Connection | |
| Connection Mode | screw connection |
| Rigidity | 0.5 mm² ... 16 mm² |
| flexibility | 0.5 mm² ... 16 mm² |
| flexible strip cold press head without plastic sleeve | 0.5 mm² ... 16 mm² |
| flexible strip cold press head with plastic sleeve | 0.5 mm² ... 16 mm² |
| AWG | 20 ... 16 |
| stripping length | 10mm |
| Tightening torque | 1.2 Nm ... 1.6 Nm |
| Screw head drive mode | slotting L |
| Output | |
| Location | 2.x |
| Wire Connection | |
| Connection Mode | screw connection |
| Rigidity | 0.5 mm² ... 16 mm² |
| flexibility | 0.5 mm² ... 16 mm² |
| flexible strip cold press head without plastic sleeve | 0.5 mm² ... 16 mm² |
| flexible strip cold press head with plastic sleeve | 0.5 mm² ... 16 mm² |
Phoenix QUINT4-ORING/12-24DC/2X20/2X20-Redundant Module 1088207
