Phoenix QUINT4-PS/12-24DC/5-15DC/2.5/PT-DC/DC converter 1066704, primary switch DC/DC converter, QUINT POWER, DIN rail installation, input: 12V DC - 24V DC, output: 12V DC/2.5 A
| Rated input voltage range |
12V DC ... 24V DC |
| Input Voltage Range |
12V DC ... 24V DC -25 % ... +33 % (SELV) |
| Wide Input |
is |
| maximum dielectric strength |
35V DC (60 seconds) |
| Impulse current |
Typical 1.5 A |
| impulse current integral (I2t) |
Typical 0.05 A2s |
| Surge current limit |
Typical 1.5 A |
| grid buffer time |
Typical 20 ms (24V DC) |
| power consumption |
Typical 3.55 A (12V DC) |
| Typical 1.75 A (24V DC) |
| Suction time |
< 1 s |
| input fuse |
15 A (fast fuse, built-in) |
| recommend use |
10 A ... 16 A (characteristics B, C, D, K or similar) |
| efficiency |
92.2% typical (12V DC) |
| output characteristics |
U/ I Advanced |
| Rated output voltage |
12V DC |
| output voltage (USet) setting range |
5V DC ... 15V DC (> 12V DC, constant capacity) |
| Rated output current (IN) |
2.5 A |
| Static Boost (IStat.Boost) |
3.125 A (≤ 40 °C) |
| Dynamic Boost (IDyn.Boost) |
5 A (≤ 60°C (4.9 s)) |
| Short-circuit protection |
is |
| Anti-aircraft turn |
is |
| Attenuation |
> 60°C (POutrating/K) |
| output power (PN) |
30W |
| output power (PStatic Margin) |
37.5W |
| output power (Pdynamic margin) |
60W |
| feedback voltage resistance |
≤ 25V DC |
| output |
≤ 18V DC |
| residual wave |
< 20 mVSS |
| control deviation static |
<1% (load change, static 10%... 90%) |
| control deviation dynamics |
<1% (load change, static 10%... 90%) |
| Control Deviation Input Voltage Change |
<1% (load change, static 10%... 90%) |
| rise time |
< 1 s (UOUT(10%... 90%)) |
| Concatenation |
is |
| maximum no-load power consumption |
< 0.5W |
| Maximum rated load power loss |
< 2.7W |
| and connect |
Yes, for redundancy and increased capacity |
| Input |
| Location |
1.x |
| Wire Connection |
| Connection Mode |
in-line connection |
| Rigidity |
0.5 mm² ... 2.5 mm² |
| flexibility |
0.5 mm² ... 2.5 mm² |
| flexible strip cold press head without plastic sleeve |
0.5 mm² ... 2.5 mm² |
| flexible strip cold press head with plastic sleeve |
0.5 mm² ... 2.5 mm² |
| Rigid (AWG) |
22 ... 14 |
| stripping length |
10mm |
| Output |
| Location |
2.x |
