Phoenix QUINT4-PS/1AC/12DC/7.5/PT-power 2904607, primary switching power supply QUINT POWER, in-line connection, DIN rail installation, input: 1 phase, output: 12V DC/7.5 A

AC operation
Input Voltage Range 100V AC ... 240V AC -15 % ... +10%
maximum dielectric strength 300V AC 60 s
National Grid Typical Voltage 120V AC
230V AC
Supply Voltage AC/DC
Impulse current Typical 11.4 A (at 25°C)
impulse current integral (I2t) < 0.2 A2s
Surge current limit < 11.4 A
frequency range (fN) 50Hz ... 60Hz-10%... + 10%
grid buffer time Typical 48 ms (120V AC)
Typical 48 ms (230V AC)
power consumption 1 A (100V AC)
0.85 A (120V AC)
0.46 A (230V AC)
0.44 A (240V AC)
Rated power consumption 96.3 VA
protection circuit transient surge protection; varistor
Typical Response Time 300 ms
input fuse 3.15 A (slow fuse, internal)
recommend use 6 A ... 16 A (characteristics B, C or similar)
PE discharge current < 0.25 mA (264V AC, 60 Hz)
< 0.17 mA
DC operation
Input Voltage Range 110V DC ... 250V DC -20 % ... +40%
Supply Voltage AC/DC
power consumption 0.92 A (110V DC)
0.4 A (250V DC)

efficiency Typical 91.5 % (120V AC)
Typical 92.5 % (230V AC)
Rated output voltage 12V DC
output voltage (USet) setting range 12V DC ... 15V DC (constant capacity)
Rated output current (IN) 7.5 A
Dynamic Boost (IDyn.Boost) 12.75 A (≤ 60°C (5 s))
feedback voltage resistance ≤ 25V DC
output ≤ 18V DC
control deviation < 0.3 % (static load change 10% ... 90%)
<3% (dynamic load change 10% ... 90%,(10Hz))
< 0.1 % (input voltage variation is ± 10 %)
residual wave < 35 mVSS(rated value)
Short-circuit protection is
Anti-aircraft turn is
output power 90W
150W
maximum no-load power consumption < 0.6W (230V AC)
< 0.6W (120V AC)
Maximum rated load power loss < 8.1W (120V AC)
< 7.1W (230V AC)
amplitude factor Typical 1.57 (120V AC)
Typical 1.67 (230V AC)
rise time 50 ms (UOut= 10%... 90%)
and connect Yes, for redundancy and increased capacity
Concatenation is
2904599

Phoenix QUINT4-PS/1AC/12DC/7.5/PT-Power 2904607

Product Center

PRODUCT CENTER