Phoenix QUINT4-PS/1AC/24DC/1.3/PT-power 2909575, primary switching power supply QUINT POWER, in-line connection, DIN rail installation, input: 1 phase, output: 24V DC/1.3 A
| AC operation |
| Input Voltage Range |
100V AC ... 240V AC -15 % ... +10% |
| maximum dielectric strength |
300V AC 30 s |
| National Grid Typical Voltage |
120V AC |
| 230V AC |
| Supply Voltage |
AC/DC |
| Impulse current |
Typical 5.9 A (at 25°C) |
| impulse current integral (I2t) |
< 0.1 A2s |
| Surge current limit |
5.9 A |
| < 14 A |
| frequency range (fN) |
50Hz ... 60Hz-10%... + 10% |
| grid buffer time |
Typical 43 ms (120V AC) |
| Typical 43 ms (230V AC) |
| power consumption |
0.46 A (100V AC) |
| 0.37 A (120V AC) |
| 0.2 A (230V AC) |
| 0.2 A (240V AC) |
| Rated power consumption |
37 VA |
| protection circuit |
transient surge protection; varistor |
| Typical Response Time |
500 ms |
| input fuse |
3.15 A (slow fuse, internal) |
| PE discharge current |
< 0.25 mA (264V AC,60 Hz) |
| 0.18 mA (264V AC,60 Hz) |
| DC operation |
| Input Voltage Range |
110V DC ... 250V DC -20 % ... +40% |
| Supply Voltage |
AC/DC |
| power consumption |
0.4 A (110V DC) |
| 0.17 A (250V DC) |
| efficiency |
Typical 89.2 % (120V AC) |
| Typical 90.7 % (230V AC) |
| output characteristics |
U/ I Advanced |
| Rated output voltage |
24V DC |
| output voltage (USet) setting range |
24V DC ... 28V DC (constant capacity) |
| Rated output current (IN) |
1.3 A |
| Static Boost (IStat.Boost) |
1.625 A (≤ 40 °C) |
| Dynamic Boost (IDyn.Boost) |
2.6 A (≤ 60°C (5 s)) |
| Attenuation |
> 60°C (2.5 %/K) |
| feedback voltage resistance |
≤ 35V DC |
| output |
≤ 32V DC |
| control deviation |
< 0.5 % (static load change 10% ... 90%) |
| <2% (dynamic load change 10% ... 90%,(10Hz)) |
| < 0.1 % (input voltage variation is ± 10 %) |
| residual wave |
< 40 mVSS(rated value) |
| Short-circuit protection |
is |
| Anti-aircraft turn |
is |
| output power |
30W |
| 38W |
| 60W |
| maximum no-load power consumption |
< 0.4W (230V AC) |
| < 0.4W (120V AC) |
| Maximum rated load power loss |
< 3.7W (120V AC) |
| < 3.1W (230V AC) |
| amplitude factor |
Typical 1.71 (120V AC) |
| Typical 1.94 (230V AC) |
| rise time |
50 ms (UOut= 10%... 90%) |
| Concurrent |
Yes, for redundancy and increased capacity |
| Concatenation |
is |
