Phoenix QUINT4-PS/1AC/24DC/20-power supply 2904602, from QUINT POWER power supply, primary switching mode, freely selectable output characteristic curve, SFB (selective fusing) technology, and NFC interface, input: 1 phase, output: 24V DC/20 A

Control Input (Configurable) Rem output power ON/OFF (SLEEP MODE)
Default (Value) Output power ON (>40 kΩ/24V DC/Open bridge between Rem and SGND)
AC operation
Network Type star network
Rated input voltage range 100V AC ... 240V AC
Input Voltage Range 100V AC ... 240V AC -15 % ... +10%
Attenuation < 100V AC (1 %/V)
maximum dielectric strength 300V AC 60 s
National Grid Typical Voltage 120V AC
230V AC
Supply Voltage AC
Impulse current Typical 11 A (at 25°C)
impulse current integral (I2t) < 0.4 A2s
Surge current limit 11 A (after 1 ms)
AC frequency range 50Hz ... 60Hz-10%... + 10%
frequency range (fN) 50Hz ... 60Hz-10%... + 10%
16.7Hz (in accordance with EN 50163)
grid buffer time Typical 28 ms (120V AC)
Typical 29 ms (230V AC)
power consumption 6.8 A (100V AC)
5.5 A (120V AC)
2.8 A (230V AC)
2.7 A (240V AC)
Rated power consumption 520 VA
protection circuit transient surge protection; varistor, gas discharge tube
power factor (cos phi) 0.98
Suction time < 1 s
Typical Response Time 300 ms (from SLEEP MODE)
input fuse 12 A (slow fuse, internal)
recommend use 10 A ... 16 A (characteristics B, C, D, K or similar)
PE discharge current < 3.5 mA
1.7 mA (264V AC,60 Hz)
DC operation
Rated input voltage range 110V DC ... 250V DC
Input Voltage Range 110V DC ... 250V DC -18 % ... +40%
Attenuation < 110V DC (1 %/V)
Supply Voltage DC
power consumption 6 A (110V DC)
2.5 A (250V DC)

efficiency Typical 92.4 % (120V AC)
94% typical (230V AC)
output characteristics U/ I Advanced
Smart HICCUP
FUSE MODE
Rated output voltage 24V DC
output voltage (USet) setting range 24V DC ... 29.5V DC (constant capacity)
Rated output current (IN) 20 A
Static Boost (IStat.Boost) 25 A
2904602

Phoenix QUINT4-PS/1AC/24DC/20-Power 2904602

Product Center

PRODUCT CENTER