Phoenix QUINT4-PS/1AC/48DC/10/CO-power supply 2904626,QUINT POWER power supply, primary switching mode, freely selectable output characteristic curve, SFB (selective fusing) technology, NFC interface, and protective coating, input: 1 phase, output: 48V DC/10 A
| Control Input (Configurable) Rem |
output power ON/OFF (SLEEP MODE) |
| Default (Value) |
Output power ON (>40 kΩ/24V DC/Open bridge between Rem and SGND) |
| AC operation |
| Rated input voltage range |
100V AC ... 240V AC |
| Input Voltage Range |
100V AC ... 240V AC -15 % ... +10% |
| Attenuation |
< 100V AC (1 %/V) |
| maximum dielectric strength |
300V AC 60 s |
| National Grid Typical Voltage |
120V AC |
| 230V AC |
| Supply Voltage |
AC |
| Impulse current |
Typical 11 A (at 25°C) |
| impulse current integral (I2t) |
< 0.4 A2s |
| Surge current limit |
11 A (after 1 ms) |
| AC frequency range |
50Hz ... 60Hz-10%... + 10% |
| frequency range (fN) |
50Hz ... 60Hz-10%... + 10% |
| 16.7Hz (in accordance with EN 50163) |
| grid buffer time |
Typical 32 ms (120V AC) |
| Typical 32 ms (230V AC) |
| power consumption |
6.8 A (100V AC) |
| 5.5 A (120V AC) |
| 2.8 A (230V AC) |
| 2.7 A (240V AC) |
| Rated power consumption |
519 VA |
| protection circuit |
transient surge protection; varistor, gas discharge tube |
| Suction time |
< 1 s |
| Typical Response Time |
300 ms (from SLEEP MODE) |
| input fuse |
12 A (slow fuse, internal) |
| recommend use |
10 A ... 16 A (characteristics B, C, D, K or similar) |
| PE discharge current |
< 3.5 mA |
| 1.3 mA (264V AC,60 Hz) |
| DC operation |
| Rated input voltage range |
110V DC ... 250V DC |
| Input Voltage Range |
110V DC ... 250V DC -18 % ... +40% |
| Attenuation |
< 110V DC (1 %/V) |
| Supply Voltage |
DC |
| power consumption |
6 A (110V DC) |
| 2.5 A (250V DC) |
| efficiency |
94% typical (120V AC) |
| 95% typical (230V AC) |
| output characteristics |
U/ I Advanced |
| Smart HICCUP |
| FUSE MODE |
| Rated output voltage |
48V DC |
| output voltage (USet) setting range |
48V DC ... 56V DC (constant capacity) |
| Rated output current (IN) |
10 A |
| Static Boost (IStat.Boost) |
12.5 A |
| Dynamic Boost (IDyn.Boost) |
15 A (5 s) |
| selective fusing (ISFB) |
60 A (15 ms) |
| Type of thermal magnetic circuit breaker |
A1...A13 / B2...B6 / C1...C3 / Z1...Z10 |
| Attenuation |
> 60°C (2.5 %/K) |
| feedback voltage resistance |
≤ 60V DC |
| output |
≤ 60V DC |
| control deviation |
< 0.5 % (static load change 10% ... 90%) |
