Phoenix QUINT4-PS/1AC/48DC/20-power supply 2904612,QUINT POWER primary switching power supply, using freely selectable output characteristic curve, SFB (selective fusing) technology and NFC interface, input: 1 phase, output: 48V DC/20 A
| Control Input (Configurable) Rem |
output power ON/OFF (SLEEP MODE) |
| Default (Value) |
Output power ON (>40 kΩ/24V DC/Open bridge between Rem and SNew) |
| AC operation |
| Network Type |
star network |
| Rated input voltage range |
100V AC ... 240V AC |
| Input Voltage Range |
100V AC ... 240V AC -15 % ... +10% |
| maximum dielectric strength |
300V AC 60 s |
| National Grid Typical Voltage |
120V AC |
| 230V AC |
| Supply Voltage |
AC/DC |
| Impulse current |
Typical 12 A (at 25°C) |
| impulse current integral (I2t) |
< 1 A2s |
| Surge current limit |
12 A (after 1 ms) |
| frequency range (fN) |
50Hz ... 60Hz-10%... + 10% |
| 16.7Hz (in accordance with EN 50163) |
| grid buffer time |
Typical 27 ms (120V AC) |
| Typical 28 ms (230V AC) |
| power consumption |
13.6 A (100V AC) |
| 5.4 A (240V AC) |
| input fuse |
16 A (slow fuse, internal) |
| recommend use |
16 A ... 20 A (characteristics B, C, D, K or similar) |
| PE discharge current |
< 3.5 mA |
| 1.7 mA (264V AC, 60 Hz) |
| DC operation |
| Rated input voltage range |
110V DC ... 250V DC |
| Input Voltage Range |
110V DC ... 250V DC -18 % ... +40% |
| Supply Voltage |
DC |
| power consumption |
12 A (110V DC) |
| 5 A (250V DC) |
| efficiency |
Typical 95.2 % (120V AC) |
| Typical 96.2 % (230V AC) |
| Rated output voltage |
48V DC |
| output voltage (USet) setting range |
48V DC ... 56V DC (constant capacity) |
| Rated output current (IN) |
20 A |
| Static Boost (IStat.Boost) |
22.5 A |
| Dynamic Boost (IDyn.Boost) |
30 A (5 s) |
| selective fusing (ISFB) |
105 A (15 ms) |
| Type of thermal magnetic circuit breaker |
A1...A20 / B2...B10 / C1...C6 / Z1...Z16 |
| Attenuation |
> 60°C ... 70°C (2.5 %/K) |
| feedback voltage resistance |
≤ 60V DC |
| output |
≤ 60V DC |
| control deviation |
< 0.5 % (static load change 10% ... 90%) |
| <1% (dynamic load change 10% ... 90%,(10Hz)) |
| < 0.25 % (input voltage variation is ± 10 %) |
| residual wave |
< 50 mVSS(rated value) |
| Short-circuit protection |
is |
| Anti-aircraft turn |
is |
| output power |
960W |
| 1080W |
