Phoenix QUINT4-PS/1AC/5DC/5/PT-power 2904595, primary switching power supply QUINT POWER, in-line connection, DIN rail installation, input: 1 phase, output: 5V DC/5 A
| AC operation |
| Input Voltage Range |
100V AC ... 240V AC -15 % ... +10% |
| maximum dielectric strength |
300V AC (60 seconds) |
| National Grid Typical Voltage |
120V AC |
| 230V AC |
| Supply Voltage |
AC/DC |
| Impulse current |
Typical 9.1 A (at 25°C) |
| impulse current integral (I2t) |
< 0.1 A2s |
| Surge current limit |
< 9.1 A |
| frequency range (fN) |
50Hz ... 60Hz-10%... + 10% |
| grid buffer time |
Typical 52 ms (120V AC) |
| Typical 52 ms (230V AC) |
| power consumption |
0.37 A (100V AC) |
| 0.3 A (120V AC) |
| 0.17 A (230V AC) |
| 0.16 A (240V AC) |
| Rated power consumption |
32.8 VA |
| protection circuit |
transient surge protection; varistor |
| Typical Response Time |
350 ms |
| input fuse |
3.15 A (slow fuse, internal) |
| recommend use |
6 A ... 16 A (characteristics B, C or similar) |
| PE discharge current |
< 0.25 mA (264V AC,60 Hz) |
| Typical 0.08 mA |
| DC operation |
| Input Voltage Range |
110V DC ... 250V DC -20 % ... +40% |
| Supply Voltage |
AC/DC |
| power consumption |
0.32 A (110V DC) |
| 0.14 A (250V DC) |
| efficiency |
Typical 87.4 % (120V AC) |
| Typical 88.4 % (230V AC) |
| Rated output voltage |
5V DC |
| output voltage (USet) setting range |
5V DC ... 6.2V DC (constant capacity) |
| Rated output current (IN) |
5 A |
| Static Boost (IStat.Boost) |
6.25 A (≤ 40 °C) |
| Dynamic Boost (IDyn.Boost) |
8 A (≤ 60°C (5 s)) |
| feedback voltage resistance |
≤ 16V DC (16V e-cap capacitor in output circuit) |
| output |
< 8V DC |
| control deviation |
< 0.3 % (load change, static 10%... 90%) |
| <3% (dynamic load change 10% ... 90%,10Hz < 4%) |
| < 0.1 % (input voltage variation is ± 10 %) |
| residual wave |
< 50 mVSS(rated value) |
| Short-circuit protection |
is |
| Anti-aircraft turn |
is |
| output power |
25W |
| 31W |
| 40W |
| maximum no-load power consumption |
< 0.37W (120V AC) |
| < 0.41W (230V AC) |
| Maximum rated load power loss |
< 3.7W (120V AC) |
| < 3.3W (230V AC) |
