Phoenix QUINT4-PS/24-48DC/48DC/2/PT-DC/DC converter 1098676, primary switching DC/DC converter, QUINT POWER, DIN rail installation, input: 24V DC - 48V DC, output: 48V DC/2 A
| Rated input voltage range |
24V DC ... 48V DC |
| Input Voltage Range |
24V DC ... 48V DC -10 % ... +25% |
| Wide Input |
is |
| maximum dielectric strength |
60V DC (60 seconds) |
| Impulse current |
Typical 8 A |
| impulse current integral (I2t) |
Typical 0.1 A2s |
| Surge current limit |
8 A |
| grid buffer time |
Typical 13 ms (24V DC) |
| Typical 18 ms (48V DC) |
| > 20 ms (24V DC / 48V DC at 50% load) |
| power consumption |
Typical 5.6 A (24V DC) |
| Typical 2.7 A (48V DC) |
| Suction time |
< 1 s |
| input fuse |
15 A (slow fuse, internal) |
| recommend use |
10 A ... 16 A (characteristics B, C, D, K or similar) |
| efficiency |
Typical 90.1 % (24V DC) |
| Typical 91.9 % (48V DC) |
| output characteristics |
U/ I Advanced |
| Rated output voltage |
48V DC |
| output voltage (USet) setting range |
48V DC ... 56V DC (> 48V stable capacity) |
| Rated output current (IN) |
2 A |
| Static Boost (IStat.Boost) |
2.5 A |
| Dynamic Boost (IDyn.Boost) |
4 A (4.9 s) |
| Short-circuit protection |
is |
| Anti-aircraft turn |
is |
| Attenuation |
> 60°C (POutrating/K) |
| output power (PN) |
96W |
| output power (PStatic Margin) |
120W |
| output power (Pdynamic margin) |
192W |
| feedback voltage resistance |
≤ 65V DC |
| output |
≤ 60V DC |
| residual wave |
< 20 mVSS |
| control deviation static |
<1% (load change, static 10%... 90%) |
| control deviation dynamics |
<1% (load change, static 10%... 90%) |
| Control Deviation Input Voltage Change |
<1% (load change, static 10%... 90%) |
| rise time |
< 1 s (UOUT(10%... 90%)) |
| Concatenation |
is |
| maximum no-load power consumption |
< 2.5W |
| Maximum rated load power loss |
< 7.5W |
| and connect |
Yes, for redundancy and increased capacity |
| Input |
| Location |
1.x |
| Wire Connection |
| Connection Mode |
in-line connection |
| Rigidity |
0.5 mm² ... 2.5 mm² |
| flexibility |
0.5 mm² ... 2.5 mm² |
| Rigid (AWG) |
20 ... 14 |
| stripping length |
10mm |
| Output |
| Location |
2.x |
