Phoenix QUINT4-S-ORING/12-24DC/1X40/VP-redundant module, with protective coating 1043418,DIN rail mounting type active QUINT single redundant module, with protective coating, input: 12V DC ... 24V DC, Output: 12V DC ... 24V DC/1 x 40 A, built-in surge protection <30V DC, including installed universal UTA 107/30 DIN rail adapter
| DC operation | |
| Rated input voltage range | 12V DC ... 24V DC |
| Input Voltage Range | 8V DC ... 27.5V DC (SELV) |
| National Grid Typical Voltage | 12V DC |
| 24V DC | |
| Supply Voltage | DC |
| power consumption | 40 A |
| Static Boost (IStat.Boost) | 45 A |
| Dynamic Boost (IDyn.Boost) | 60 A (5 s) |
| selective fusing (ISFB) | 215 A (15 ms) |
| prevents polarity reversal | <is 60V |
| Rated input current (IN) | 40 A (-40°C ... 60 °C) |
| input current IStatic | 45 A (40 °C) |
| input current IDynamic | 60 A (5 s) |
| input current ISFB | 215 A (15 ms) |
| Transient overvoltage protection | varistor |
| voltage drop, input/output | 0.1V DC |
| efficiency | Typical 99% (12V DC) |
| Typical 99.2 % (24V DC) | |
| Rated output voltage | UIn- 0.1V |
| Rated output current (IN) | 40 A |
| Static Boost (IStat.Boost) | 45 A |
| Dynamic Boost (IDyn.Boost) | 60 A (5 s) |
| selective fusing (ISFB) | 215 A (15 ms) |
| Attenuation | 60°C ... 70°C (2.5 %/K) |
| output | < 30V DC |
| Maximum rated load power loss | 6.5W (IOUT= 40 A) |
| 6W (IOUT= 40 A) | |
| Concatenation | No |
| signal: OK, 13/14 | |
| Output Description | Combination contact |
| maximum switching voltage | Max. 30V AC/DC |
| Maximum starting current | ≤ 100 mA (short-circuit protection) |
| signal relay 13/14 | |
| Default (Value) | open. |
| signal relay 13/14 | |
| Default (Value) | closed |
| signal relay 13/14 | |
| Default (Value) | open. |
| signal relay 13/14 | |
| Default (Value) | open. |
| Input | |
| Connection Mode | screw connection |
| Minimum cross section of rigid conductor | 0.5 mm² |
| Maximum cross section of rigid conductor | 16 mm² |
| Minimum cross section of flexible lead | 0.5 mm² |