ꄴPrevious： Phoenix QUINT4-UPS/1AC/1AC/1KVA-Uninterruptible Power Supply 2320283
ꄲNext： Phoenix QUINT4-S-ORING/12-24DC/1X40/VP-Redundant module with protective coating 1043418

Phoenix QUINT4-SYS-PS/1AC/24DC/2.5/SC-power 2904614, primary switch mode QUINT POWER power supply, screw connection, DIN rail installation, power supply for equipment through TBUS DIN rail connector, protective coating, input: single phase, Output: 24V DC/2.5 A

AC operation
Rated input voltage range 100V AC ... 240V AC
Input Voltage Range 100V AC ... 240V AC -15 % ... +10%
maximum dielectric strength 300V AC 30 s
National Grid Typical Voltage 120V AC
230V AC
Supply Voltage AC/DC
Impulse current Typical 10 A (at 25°C)
impulse current integral (I2t) Typical 0.1 A2s
Surge current limit 10 A
frequency range (fN) 50Hz ... 60Hz ± 10%
16.7Hz (in accordance with EN 50163)
grid buffer time Typical 31 ms (120V AC)
Typical 31 ms (230V AC)
power consumption 0.85 A (100V AC)
0.7 A (120V AC)
0.39 A (230V AC)
0.37 A (240V AC)
protection circuit transient surge protection; varistor
Typical Response Time 500 ms
input fuse 4 A (slow fuse, internal)
recommend use 6 A ... 16 A (characteristics B, C, D, K or similar)
PE discharge current < 0.25 mA (264V AC, 60 Hz)
< 0.22 mA
DC operation
Input Voltage Range 110V DC ... 250V DC -20 % ... +40%
Supply Voltage AC/DC
power consumption 0.75 A (110V DC)
0.33 A (250V DC)

efficiency Typical 93% (120V AC)
94% typical (230V AC)
Rated output voltage 24V DC
output voltage (USet) setting range 24V DC ... 27V DC (constant capacity)
Rated output current (IN) 2.5 A
Static Boost (IStat.Boost) 3.125 A (≤ 40°C)
Dynamic Boost (IDyn.Boost) 4 A (≤ 60°C (on ≤ 5 s/off ≥ 5 s))
feedback voltage resistance ≤ 32V DC
output ≤ 30V DC ±2%
control deviation < 0.5 % (static load change 10% ... 90%)
<2% (dynamic load change 10% ... 90%,(10Hz))
< 0.25 % (input voltage variation is ± 10 %)
residual wave < 40 mVSS(rated value)
2904598
넳 넲

Phoenix QUINT4-SYS-PS/1AC/24DC/2.5/SC-Power 2904614

Product Center

PRODUCT CENTER

▼