Phoenix MINI MCR-2-UI-FRO-PT-frequency transmitter 2902032. The analog frequency transmitter has a limit function and uses plug-in connection technology to convert standard signals into frequency or PWM signals. Configuration via DIP switch or software. Plug-in connection technology, standard configuration.
| Product Type | Frequency value transformer |
| product series | MINI Analog Pro |
| Channels | 1 |
| Model | isolation amplifier |
| configuration | DIP switch |
| Software | |
| Application | |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| Function | |
| configuration | DIP switch |
| Software | |
| Application | |
| galvanic isolation between input and output | is |
| step response (0-99%) | 120 ms (15Hz sample rate) |
| 35 ms (60Hz sample rate) | |
| 15 ms (240Hz sampling rate, software only) | |
| 130 ms (15Hz sample rate) | |
| 40 ms (60Hz sample rate) | |
| 20 ms (240Hz sampling rate, software only) | |
| maximum temperature coefficient | < 0.01 %/K |
| temperature coefficient, typical | 0.01 %/K |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| power supply | |
| Rated supply voltage | 24V DC |
| Supply Voltage Range | 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Typical current consumption | 27 mA (12V DC) |
| 13.5 mA (24V DC) | |
| power consumption | ≤ 350 mW (9.6V DC) |
| signal: current/voltage | |
| Input Number | 1 |
| configurable/programmable | is |
| voltage input signal | 0V ... 10V (via DIP switch) |
| 2V ... 10V (via DIP switch) | |
| 0V ... 5V (via DIP switch) | |
| 1V ... 5V (via DIP switch) | |
| 10V ... 0V (via DIP switch) | |
| 10V ... 2V (via DIP switch) | |
| 5V ... 0V (via DIP switch) | |
| 5V ... 1V (via DIP switch) | |
| 0V ... 12V (can be set via software) | |