Phoenix MINI MCR-2-UI-I-OLP-passive isolator 2902061, output loop power supply 2-way isolator adopts plug-in connection technology, used for electrical isolation of unipolar and bipolar analog signals. Inputs can be configured via DIP switches. Screw connection technology, standard configuration.
| Product Type | isolation amplifier |
| Product Series | MINI Analog Pro |
| Channels | 1 |
| Model | isolation amplifier |
| configuration | DIP switch |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| electrical isolation | 2 road isolation |
| galvanic isolation between input and output | is |
| cut-off frequency (3dB) | about 30Hz |
| step response (10-90%) | 20 ms |
| maximum temperature coefficient | 0.01 %/K |
| temperature coefficient, typical | 0.005 %/K |
| Maximum transmission error | ≤ 0.1 % (of terminal value) |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| Power | |
| Supply Voltage Range | 8V DC ... 30V DC (loop power supply, no external power supply required) |
| Typical current consumption | ≤ 20 mA |
| power consumption | ≤ 600 mW |
| signal: current/voltage | |
| Number of inputs | 1 |
| configurable/programmable | is |
| voltage input signal | 0 mV ... 1000 mV |
| 0 mV ... 750 mV | |
| 0 mV ... 500 mV | |
| 0 mV ... 300 mV | |
| 0 mV ... 250 mV | |
| 0 mV ... 200 mV | |
| 0 mV ... 125 mV | |
| 0 mV ... 120 mV | |
| 0 mV ... 150 mV | |
| 0 mV ... 100 mV | |
| 0 mV ... 75 mV | |
| 0 mV ... 60 mV | |
| 0 mV ... 50 mV | |
| 0V ... 10V | |
| 0V ... 7.5V | |
| 0V ... 5V | |
| 0V ... 3V | |
| 0V ... 2.5V | |
| 0V ... 2V | |
| 0V ... 1.5V | |
| 0V ... 1.25V | |
| 0V ... 1.2V | |
| 0V ... 30V | |
| 0V ... 25V | |
| 0V ... 20V | |
| 0V ... 12.5V | |
| 0V ... 12V | |
| 0V ... 15V | |
| -1000 mV ... 1000 mV | |
| -750 mV ... 750 mV | |
| -500 mV ... 500 mV | |
| -300 mV ... 300 mV | |
| -250 mV ... 250 mV | |
| -200 mV ... 200 mV | |
| -125 mV ... 125 mV | |
| -120 mV ... 120 mV | |
| -150 mV ... 150 mV | |
| -100 mV ... 100 mV | |
| -75 mV ... 75 mV | |
| -60 mV ... 60 mV | |
| -50 mV ... 50 mV | |
| -10V ... 10V | |
| -7.5V ... 7.5V | |
| -5V ... 5V | |
| -3V ... 3V | |
| -2.5V ... 2.5V | |
| -2V ... 2V | |
| -1.25V ... 1.25V | |
| -1.2V ... 1.2V | |
| -1.5V ... 1.5V | |
| -30V ... 30V | |
| -25V ... 25V | |
| -20V ... 20V | |
| -12.5V ... 12.5V | |
| -12V ... 12V | |
| -15V ... 15V | |
| 2V ... 10V (additional areas can also be configured, see table) | |
| 1V ... 5V (additional areas can also be configured, see table) | |
Phoenix MINI MCR-2-UI-I-OLP-Passive Isolator 2902061
