Phoenix MINI MCR-2-UI-REL-PT-Threshold Switch 2902035, the universally configurable limit value switch adopts SPDT contact relay output and plug-in connection technology, which can be used to switch analog limits. Configuration via DIP switch or software. Plug-in connection technology, standard configuration.
| Product Type | threshold switch |
| Product Series | MINI Analog Pro |
| Channels | 1 |
| Model | isolation amplifier |
| configuration | DIP switch |
| Software | |
| Application | |
| insulation characteristics: GB Standard | |
| Overvoltage Category | II |
| pollution level | 2 |
| Function | |
| configuration | DIP switch |
| Software | |
| Application | |
| galvanic isolation between input and output | is |
| Switching Point Accuracy | < 0.1% |
| step response (0-99%) | 140 ms (can be set via software) |
| maximum temperature coefficient | 0.01 %/K |
| Maximum transmission error | 0.1 % (of terminal value) |
| Electrical isolation input/output/power supply | |
| Rated insulation voltage | 300Vrms |
| Test Voltage | 3 kV AC (50 Hz, 60 s) |
| insulation | reinforced insulation conforming to IEC/EN 61010-1 |
| Power | |
| Rated supply voltage | 24V DC |
| Supply Voltage Range | 9.6V DC ... 30V DC (DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, order number 2869728) can be used to bridge the power supply. Can be stuck to a 35mm DIN rail conforming to the EN60715 standard)) |
| Typical current consumption | 40 mA (12V DC) |
| 20 mA (24V DC) | |
| power consumption (I output) | ≤ 0.5W |
| signal: current/voltage | |
| configurable/programmable | is |
| voltage input signal | 0V ... 10V (via DIP switch) |
| 0V ... 12V (can be set via software) | |
| Maximum voltage input signal | 12V |
| current input signal | 0 mA ... 20 mA (via DIP switch) |
| 0 mA ... 24 mA (can be set via software) | |
| Maximum current input signal | 24 mA |
| input voltage | > 120 kΩ |
| input current | 50 Ω (+0.7V for diode test) |
| switching points | can be set via software or DIP switch |
| switching: relay | |
| Contact Type | 1 changeover contact |
| Contact Material | AgSnO2, hard gold plated |
| maximum switching voltage | 250V AC |
| 30V DC | |
| 240V AC (UL) | |
| limit continuous current | 6 A AC |
| 4 A DC | |
| minimum switching current | 100 mA (12V DC) |
| maximum switching current | 6 A AC (250V AC) |
| 4 A DC (30V DC) | |
| mechanical life | 2x 107Switch Times |
| response delay | 0 s ... 10 s (can be set freely via software) |
| Built-in hysteresis | can be set freely via software |
Phoenix MINI MCR-2-UI-REL-PT-Threshold Switch 2902035
