Phoenix UNO-PS/2AC/24DC/90W/C2LPS-power supply 2904371, UNO POWER power supply for DIN rail installation, primary switching mode, input: 2 phases, output: 24V DC/90W
AC operation
Rated input voltage range
2x 400V AC ... 500V AC
Input Voltage Range
2x 264V AC ... 575V AC
operation
2x 264V AC ... 320V AC (10% downrated)
Attenuation
2x 264V AC ... 320V AC (10% downrated)
AC input voltage range
264V AC ... 575V AC (<320V AC, reduced by 2.5%/10V)
Supply Voltage
AC
Impulse current
< 30 A (typical)
impulse current integral (I2t)
< 0.5 A2s (typical)
frequency range (fN)
50Hz ... 60Hz ± 10%
grid buffer time
> 65 ms (400V AC)
> 100 ms (500V AC)
power consumption
Typical 0.55 A (400V AC)
Typical 0.48 A (500V AC)
Rated power consumption
211.3 VA
protection circuit
transient surge protection; varistor
power factor (cos phi)
0.48
input fuse
2 A (slow fuse, internal)
recommend use
6 A ... 16 A (characteristics B, C, D, K)
efficiency
Typical 89% (400V AC)
89% typical (480V AC)
output characteristics
HICCUP
Rated output voltage
24V DC
Rated output current (IN)
3.75 A
3.38 A (10% downrating)
Attenuation
55°C ... 70°C (2.5 %/K)
feedback voltage resistance
< 35V DC
output
≤ 35V DC
control deviation
<1% (load change, static 10%... 90%)
<3% (dynamic load change 10%... 90%, 10Hz)
< 0.1 % (input voltage variation is ± 10 %)
residual wave
< 50 mVSS(rated value)
Short-circuit protection
is
output power
90W
maximum no-load power consumption
< 0.7W
Maximum rated load power loss
< 12W
rise time
< 0.5 s (UOUT(10%... 90%))
response time
< 2 ms
and connect
No
Concatenation
No
Input
Connection Mode
screw connection
Minimum cross section of rigid conductor
0.2 mm²
Maximum cross section of rigid conductor
2.5 mm²
flexible lead
0.2 mm²
flexible conductor
2.5 mm²
Single conductor/flexible connection point, cold press head with plastic sleeve, minimum
0.2 mm²
Single wire/flexible connection point, cold press head with plastic sleeve, maximum
2.5 mm²
single-conductor/flexible connection point, cold press head without plastic sleeve, minimum
0.2 mm²
Single wire/flexible connection point, cold press head with plastic sleeve, maximum
