Phoenix UNO-PS/350-900DC/24DC/60W-DC/DC converter 2906300, UNO DC/DC converter with wide input range, primary switching mode, for DIN rail installation, input: 350 ... 900V DC, Output: 24V DC/60W
| DC operation | |
| Rated input voltage range | 350V DC ... 900V DC |
| Input Voltage Range | 300V DC ... 1000V DC |
| Wide Input | is |
| maximum dielectric strength | ≤ 1050V DC |
| Supply Voltage | DC |
| Impulse current | < 1 A (typical) |
| impulse current integral (I2t) | < 0.38 A2s |
| power consumption | 0.19 A (350V DC) |
| 0.07 A (1000V DC) | |
| Typical Response Time | < 1 s |
| recommend use | 1 A (characteristic gPV or similar) |
| recommend | 1000V DC |
| efficiency | > 90% |
| output characteristics | U/ I |
| Rated output voltage | 24V DC |
| Rated output current (IN) | 2.5 A (-25°C ... 55 °C) |
| Attenuation | 55°C ... 70°C (2.5 %/K) |
| feedback voltage resistance | < 35V DC |
| output | < 35V DC |
| control deviation | <1% (load change, static 10%... 90%) |
| <3% (dynamic load change 10%... 90%, 10Hz) | |
| < 0.1 % (input voltage variation is ± 10 %) | |
| residual wave | < 20 mVSS(rated value) |
| output power | 60W |
| maximum no-load power consumption | < 0.5W |
| Maximum rated load power loss | < 6.5W |
| rise time | < 1 s (UOUT(10%... 90%)) |
| response time | < 2 ms |
| and connect | Yes, for redundancy and increased capacity |
| Concatenation | No |
| signal: DC OK active | |
| Output Description | UOUT>0.9xUN: High Signal |
| Input | |
| Connection Mode | screw connection |
| Minimum cross section of rigid conductor | 0.2 mm² |
| Maximum cross section of rigid conductor | 2.5 mm² |
| Minimum cross section of flexible lead | 0.2 mm² |
| Flexible lead maximum cross section | 2.5 mm² |
| Minimum Wire Cross Section AWG | 24 |
| Maximum conductor cross section AWG | 14 |
| stripping length | 8mm |
| thread | M3 |
| Minimum tightening torque | 0.5 Nm |
| Maximum tightening torque | 0.6 Nm |
Phoenix UNO-PS/350-900DC/24DC/60W-DC/DC Converters 2906300
