Phoenix PSR-M-GW-PB-PI-data interface 1105100, used to connect the PSR-M base module to the gateway of the higher-level controller, supports PROFIBUS DP protocol, TBUS interface, pluggable in-line terminals, and includes TBUS connector
rated conditions
1.44W
Rated operating mode
100% Eligible
Interface
DIN rail TBUS for connecting the host module, within the scope of delivery
rated overvoltage/insulation
4 kV foundation isolation
Power
Name
A1/A2
Rated control circuit supply voltage US
19.2V DC ... 28.8V DC
Rated control circuit supply voltage US
24V DC-20%/+ 20% (external fuse, typical 4 A)
Rated control supply current IS
Typical 60 mA
US
Typical 1.44W
Impulse current
< 2.2 A (Δt = 1 ms Us)
filter time
typical 5 ms (at A1, at the voltage dip Us)
protection circuit
series protection to prevent polarity reversal
suppression diode
Connection Mode
in-line connection
stripping length
10mm
data: network interface
Communication Transport Protocol
PROFIBUS DP
communication standard
IEC 61158,RS-485 2-wire system
Connection Mode
D-SUB-9 female connector
connection quantity
1
transmission speed
12 Mbps
Data: Service Interface
Connection Mode
High-speed USB 2.0
connection quantity
1
Status Display
1 x LED (green),2 x LED (green, red)
Operating voltage display
1 x LED (green)
error indication
2 x LED (red)
width
22.61mm
height
107.74mm
depth
114.75mm
color (shell)
gray (RAL 7042)
Shell Material
Non-reinforced polyamide PA
environmental conditions
protection level
IP20
installation position
IP54
ambient temperature (operation)
-10°C ... 55°C (note volume reduction)
ambient temperature (storage/transport)
-20°C ... 85°C
maximum height
≤ 2000 m (above sea level)
Maximum allowable humidity (storage/transportation)
