Phoenix PSR-M-GW-PN-PI-data interface 1105102, used to connect the PSR-M base module to the gateway of the upper-level controller, supports PROFINET protocol, TBUS interface, pluggable in-line terminals, and includes TBUS connector
| rated conditions | 1.92W |
| Rated operating mode | 100% Eligible |
| Interface | DIN rail TBUS for connecting the host module, within the scope of delivery |
| rated overvoltage/insulation | 4 kV foundation isolation |
| Power | |
| Name | A1/A2 |
| Rated control circuit supply voltage US | 19.2V DC ... 28.8V DC |
| Rated control circuit supply voltage US | 24V DC-20%/+ 20% (external fuse, typical 4 A) |
| Rated control supply current IS | Typical 60 mA (no network connection) |
| Typical 70 mA (with 1 network interface) | |
| Typical 80 mA (with 2 network interfaces) | |
| US | Typical 1.68W (with 1 network interface) |
| Typical 1.92W (with 2 network interfaces) | |
| Impulse current | < 2.2 A (Δt = 1 ms Us) |
| filter time | typical 5 ms (Usvoltage dips) |
| protection circuit | series protection to prevent polarity reversal |
| suppression diode | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| data: network interface | |
| Communication Transport Protocol | PROFINET |
| Connection Mode | RJ45 female connector |
| connection quantity | 2 |
| transmission speed | 100 Mbps (full duplex) |
| Data: Service Interface | |
| Connection Mode | High-speed USB 2.0 |
| connection quantity | 1 |
| Status Display | 1 x LED (green),2 x LED (green, red) |
| Operating voltage display | 1 x LED (green) |
| error indication | 2 x LED (red) |
| width | 22.61mm |
| height | 107.74mm |
| depth | 113.6mm |
| color (shell) | gray (RAL 7042) |
| Shell Material | Non-reinforced polyamide PA |
| environmental conditions | |
| protection level | IP20 |
| installation position | IP54 |
Phoenix PSR-M-GW-PN-PI-Data Interface 1105102
