ꄴPrevious： Phoenix NEARFI PD 2A ETH R-Inductive Coupler 1234225
ꄲNext： Phoenix NEARFI P 2A R-Inductive Coupler 1234229

Phoenix NEARFI PD 2A ETH B- inductive coupler 1234224,NearFi base station contactless power supply and real-time Ethernet coupler, 50W (US),100 Mbps, range ≤ 10mm,M12 screw connection, IP65, can be used in combination with NEARFI PD 2A ETH R. Not compatible with NEARFI 2200 (new product)

Product Type inductive coupler
Application Ethernet
Power
MTTF 115 years (SN 29500 standard, temperature 25°C, duty cycle 21%)
60 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%)
27 years (SN 29500 standard, temperature 40°C, duty cycle 100%)
insulation characteristics
Overvoltage Category II
pollution level 2

rated conditions 4.08W
Power
Supply Voltage Range 19V DC ... 30V DC
Typical current consumption 170 mA (without remote coupler, at 24V DC and 25°C)
480 mA (with remote coupler, no load, at 24V DC and 25°C)
Maximum current consumption ≤ 3.6 A (no remote coupler, 2 A load, input voltage 19V DC)
Impulse current ≤ 0.8 A (8 ms at 24V DC without remote coupler)
≤ 4.5 A (6 ms at 24V DC, no remote coupler, no load)
protection circuit transient protection, polarity protection

digital quantity
Input Description Digital Input
Input Number 1
voltage input signal 19V DC ... 30V DC
Toggle Level "1" Signal 19V DC ... 30V DC

signal
Output Name digital output
outputs 1
voltage output signal ≤ 24V DC

Power
Connection Mode M12 Pin, A- coded

data: Ethernet interface, 100Base-T(X), IEEE 802.3 compliant
transmission speed 100 Mbps
Connection Mode M12 hole type, D code
Connection Method Considerations auto-negotiation and auto-crossover, fast start (FSU,<500 ms)
Typical bit error rate≤ 10-12
Channels 1
Transmission Length 100 m (shielded twisted pair)
transmission medium copper cable
Supported Protocols protocol transparency: PROFINET, PROFINET IRT, PROFIsafe, EtherCAT®, Modbus/TCP, Powerlink, TSN, etc.
inductance: power transmission
Suction time < 450 ms (ETH full-duplex operation mode)
minimum 0mm
≤ 10 mm (at 55°C)
≤ 12 mm (at 25°C)
center offset ± 5mm
can connect the wireless module 1 (remote coupler)
Frequency Range 100 kHz ... 148.5 kHz (power transmission)
test field ~ 1.95 & micro;A/m (within 10 m)
1234225
넳 넲

Phoenix NEARFI PD 2A ETH B- Inductive Coupler 1234224

Product Center

PRODUCT CENTER

▼