Phoenix DEK-OE-230AC/ 48DC/100/SO 46-solid state relay terminal 2964678, solid state relay interface, its design can resist the interference of the control terminal, input: 230V AC, output: 48V DC/100 mA
| Product Type | Solid State Relay Module |
| product series | DEK |
| Application | anti-interference filter |
| Mode of operation | 100% operating factor |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 19.03.2025 |
| test voltage (input/output) | 2.5 kV AC (input/output) |
| Rated input voltage UN | 230V AC |
| relative to UNinput voltage range | 0.9 ... 1.1 |
| Input Voltage Range | 207V AC ... 253V AC |
| switch threshold "0" signal, voltage | ≤ 92V AC |
| switch threshold "1" signal voltage | > 207V AC |
| UN | 2.5 mA |
| Typical Response Time | 4.4 ms |
| Typical closing time | 14 ms |
| Operating voltage display | yellow LED |
| protection circuit | Surge protection; Varistor |
| RC element; RC element | |
| transmission frequency | 5Hz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 3V DC ... 48V DC |
| limit continuous current | 100 mA |
| Voltage drop at maximum limited continuous current | ≤ 0.9V |
| output circuit | 3-wire connection, reference ground |
| protection circuit | polarity protection; polarity protection diode |
| dry running; freewheeling diode |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm |
| width | 6.2mm |
| height | 80mm |
| depth | 56mm |
| color | green (RAL 6021) |
Phoenix DEK-OE-230AC/ 48DC/100/SO 46-Solid State Relay Terminal 2964678
