Phoenix DEK-OE-230AC/ 48DC/100-solid state relay terminal 2940210, input solid state relay terminal, input: 230V AC, output: 3 - 48V DC/100 mA, terminal width: 6.2mm
| Product Type | Solid State Relay Module |
| product series | DEK |
| Application | output function |
| Mode of operation | 100% operating factor |
| insulation characteristics: standards/regulations | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 19.03.2025 |
| test voltage (input/output) | 2.5 kV AC (input/output) |
| Rated input voltage UN | 230V AC |
| relative to UNinput voltage range | 0.9 ... 1.1 |
| Input Voltage Range | 207V AC ... 253V AC |
| switch threshold "0" signal, voltage | ≤ 92V |
| switch threshold "0" signal, reference UN | ≤ 0.4 |
| switch threshold "1" signal voltage | ≥ 207V |
| switch threshold "1" signal, reference UN | ≥ 0.9 |
| UN | 2.5 mA |
| Typical Response Time | 10 ms |
| Typical closing time | 20 ms |
| Operating voltage display | yellow LED |
| protection circuit | polarity protection |
| Surge Protection | |
| sending frequency | 3Hz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 3V DC ... 48V DC |
| limit continuous current | 100 mA |
| Voltage drop at maximum limited continuous current | ≤ 0.9V |
| output circuit | 2 lines, floating ground; 3 lines, reference ground |
| protection circuit | polarity protection; polarity protection diode |
| backup diode; freewheeling diode | |
| output resistance | approx. 22 kΩ (3-wire system) |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm |
Phoenix DEK-OE-230AC/ 48DC/100-Solid State Relay Terminal 2940210
