Phoenix DEK-OV- 12DC/ 24DC/ 10-solid state relay terminal 2961749, high-power solid state relay terminal, input: DC voltage, output: DC voltage, input voltage: 12V DC
| Product Type | Solid State Relay Module |
| product series | DEK |
| Application | output function |
| Mode of operation | 100% operating factor |
| insulation characteristics: electrical clearance and creepage distance between power supply circuits | |
| insulation | Foundation Isolation |
| Overvoltage Category | II |
| pollution level | 2 |
| Data Management Status | |
| Last data maintenance date | 19.03.2025 |
| test voltage (input/output) | 2.5 kV AC (input/output) |
| Electrical clearance and creepage distance between power supply circuits | |
| Rated insulation voltage | 50V DC |
| Rated overvoltage | 0.5 kV |
| Rated input voltage UN | 12V DC |
| relative to UNinput voltage range | 0.8 ... 1.2 |
| Input Voltage Range | 9.6V DC ... 14.4V DC |
| switch threshold "0" signal, reference UN | ≤ 0.4 |
| switch threshold "1" signal, reference UN | ≥ 0.8 |
| UN | 4.7 mA |
| Typical Response Time | 100 µs |
| Typical closing time | 500 µs |
| Operating voltage display | yellow LED |
| protection circuit | polarity protection |
| Surge Protection | |
| sending frequency | 100Hz |
| Contact Type | 1 N/O contact |
| Digital Output Design | electronic |
| Output Voltage Range | 8V DC ... 33V DC |
| limit continuous current | 10 A (see temperature load curve) |
| surge current | 100 A (t = 20 ms) |
| Voltage drop at maximum limited continuous current | < 50 mV |
| output circuit | 3-wire connection, reference ground |
| protection circuit | polarity protection |
| Surge Protection |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm |
| width | 6.2mm |
| height | 80mm |
| depth | 56mm |