Phoenix OV-24DC/ 60DC/4-semiconductor relay 2982647, solid state relay, used for signal amplification and isolation in control and load circuits, can be inserted into the base SIM-AMS, or directly soldered to the printed circuit board, input voltage: 4.25-32V DC, output: 1-60V DC/4A
| Product Type | Single-phase solid-state relay |
| Mode of operation | 100% operating factor |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Data Management Status | |
| Last data maintenance date | 19.03.2025 |
| test voltage (input/output) | 4 kV (50Hz,1 minute, input/output) |
| Rated input voltage UN | 24V DC |
| Input Voltage Range | 4.25V DC ... 32V DC |
| switch threshold "0" signal, voltage | < 1V DC |
| switch threshold "1" signal voltage | > 3.3V DC |
| UN | 15 mA |
| Typical Response Time | < 100 µs |
| Typical closing time | < 250 µs |
| sending frequency | 100Hz |
| Digital Output Design | electronic |
| Output Voltage Range | 1V DC ... 60V DC |
| limit continuous current | 4 A (see temperature load curve) |
| Minimum Load Current | 1 mA |
| leakage current | 100 µA |
| surge current | 25 A (tp= 1 s) |
| Voltage drop at maximum limited continuous current | 0.5V |
| output circuit | 2-wire connection |
| protection circuit | polarity protection; polarity protection diode |
| Dimensional drawing | |
| width | 10.5mm |
| height | 43mm |
| depth | 25.4mm |
| color | black (RAL 9005) |
| environmental conditions | |
| Ambient temperature (operation) | -20°C ... 80°C |
| ambient temperature (storage/transport) | -20°C ... 80°C |
| UKCA | |
| Certificate | UKCA Compliance |
| Standards/Regulations | EN 61000-4-2 |
| EN 61000-4-3 | |
| EN 61000-4-4 | |
| EN 55011 |
| Assembly Instructions | arrangement interval> 20mm |
| Installation position | arbitrary |
Phoenix OV-24DC/ 60DC/4-Semiconductor Relay 2982647
