ꄴPrevious： Phoenix PSI-MOS-RS485W2/FO 660 E-FO Converter 2708313
ꄲNext： Phoenix PSI-MOS-RS422/FO1300 E-FO Converter 2708575

Phoenix PSI-MOS-RS485W2/FO1300 E-FO Converter 2708562,FO Converter, Built-in Optical Signal Diagnostic Function, Alarm Contact, Used for RS-485 2-wire Bus System (SUCONET K, MODBUS...) with Rate Up to 500kbps, NRZ Coding, Terminal Equipment with One FO Interface (SC Dual Port), 1300nm, Used for Glass Fiber

Product Type Media Converter
Product Series PSI-MOS
MTTF 903 years (SN 29500 standard, temperature 25°C, duty cycle 21%)
412 years (SN 29500 standard, temperature 40°C, duty cycle 34.25%)
169 years (SN 29500 standard, temperature 40°C, duty cycle 100%)
MTBF 484 years (Telcordia standard, temperature 25°C,21% operation cycle (5 days a week, 8 hours a day))
102 years (Telcordia standard, 40°C,34.25% cycle (5 days a week, 12 hours a day))

electrical isolation VCC // RS-485
rated conditions 1.375W
test voltage data interface/power supply 1.5 kVrms(50 Hz,1 min)
power supply
Supply Voltage Range 18V DC ... 32V DC
Rated supply voltage 24V DC (UL compliant)
Typical current consumption 55 mA (24V DC)
Maximum current consumption 90 mA
≤ 2 A (via DIN rail connector when running in connection site)

switching
Output Name relay output
Output Description Alarm output
outputs 1
maximum switching voltage 60V DC (resistive load, universal load)
30V AC (resistive load)
42V AC (peak, resistive load)
limit continuous current 0.46 A

power supply
Connection Mode plug-in COMBICON screw terminal block
stripping length 7.00mm
Tightening torque 0.56 Nm ... 0.79 Nm

-bit distortion, input ± 35% (allowed)
-bit distortion output < 6.25%
signal Modbus
S-BUS
Suconet K
J-BUS
DATA HIGHWAY
data: optical fiber
Channels 1
minimum transmission power -3.4 dBm (50/125 μm, multimode fiber)
-4.7 dBm (62.5/125 μm, multimode fiber)
-5.5 dBm (9/125 μm, single mode fiber)
transmission length including 3 dB system margin 25km (F-G 50/125 0.7dB/km,1300nm)
22 km (F-G 62.5/125 0.8 dB/km at 1300 nm)
45 km (with F-E 9/125 0.4 dB/km at 1300 nm)
Transfer Protocol RS-485 interface, protocol transparency
Connection Mode SC Duplex
wavelength 1300 nm
Minimum Receiving Sensitivity -25.5 dBm (50/125 &micro;m)
-25.5 dBm (62.5/125&micro;m)
-26.5 dBm (9/125 &micro;m)
receiver 0 dBm (9/125 &micro;m)
transmission medium multimode glass fiber
single-mode glass fiber
data: RS-485 interface, 2-wire system
serial transmission rate 4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps
Connection Mode pluggable screw connection
Transmission Length ≤ 1200 m (depending on data rate, shielded stranded data cable)
terminal resistance 390 Ω (connectable)
220 Ω
390 Ω
single wire/wiring point, rigid 0.2 mm² ... 2.5 mm²
single wire/wiring point, flexible 0.2 mm² ... 2.5 mm²
AWG stranded wire, flexible 14
AWG Wire Minimum Cross Section, Flexible 24
single wire/wiring point, maximum rigid AWG 14
Single Wire/End Point, Minimum Rigid AWG 24
transmission medium copper cable
File Format/Encoding UART(11/10bit switchable; NRZ non-zero code), non-slip
2708562
넳 넲

Phoenix PSI-MOS-RS485W2/FO1300 E-FO Converter 2708562

Product Center

PRODUCT CENTER

▼