Phoenix EMG 12-TR/INV-switching amplifier 2943437, conversion module. The conversion module is configured to convert between a negative switching n-p-n transistor output and a positive switching p-n-p output.
| Product Type | Solid State Relay Module |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| power supply | |
| Supply Voltage Range | 20V DC ... 30V DC (UV) |
| NPN | |
| switch threshold "1" signal voltage | < 7V (at UV= 24V;< (UV- 17 V)) |
| switch threshold "0" signal, voltage | > 15V (UV= 24V;>(UV-9V)) |
| minimum voltage input signal | -2V |
| Maximum voltage input signal | 26V (UV= 24V; UV2V) |
| PNP | |
| switch threshold "1" signal voltage | > 17V |
| switch threshold "0" signal, voltage | < 9V |
| minimum voltage input signal | -2V |
| Maximum voltage input signal | 26V (UV= 24V; UV2V) |
| Continuous load current | 200 mA |
| leakage current | < 1 mA |
| residual pressure | < 1V |
| sending frequency | 15 kHz |
| Connection Mode | screw connection |
| stripping length | 8mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 4 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 24 ... 12 |
| width | 12.5mm |
| height | 75mm |
| depth | 55mm |
| color | Green (RAL 6021) |
Phoenix EMG 12-TR/INV-Switching Amplifier 2943437
