Phoenix ETD-BL-1T-ON-10S-Timer relay 2917379, time relay with turn-on delay (voltage controlled), adjustable time range (0.1 seconds -10 seconds), with spring connection
| Product Type | Timer Relay |
| Mode of operation | 100% operating factor |
| mechanical life | approx. 2x 107times |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 2 |
| service life, electrical | approx. 2x 105times, resistive load 1000 VA |
| Rated insulation voltage | 300V AC |
| Rated overvoltage | 6 kV |
| Input Voltage Range | 24V DC (19.2V DC ...30V DC) |
| Rated current type | 15 mA (relay ON) |
| 7 mA (relay OFF) | |
| Function | ON: with turn-on delay |
| Set Range Time | 0.1 s ... 10 s |
| Setting Accuracy | ≤ 2.5 % (final value) |
| repeat accuracy | ≤ 0.5 % (from end value of setting range) |
| control | |
| Control Pulse Length | minimum 50 ms |
| switching | |
| Contact Type | 1 floating transfer contact |
| output fuse | 6.3 A (fast fuse) |
| Connection Mode | screw connection |
| stripping length | 8mm |
| Rigid conductor cross section | 0.14 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 2.5 mm² |
| Connectable Guide Cross Section AWG | 30 ... 12 |
| Tightening torque | 0.6 Nm ... 0.8 Nm |
| 5 lbf-in. ... 7 lbf-in. |
| Status Display | Green LED(POWER) |
| yellow LED (relay activity) |
| width | 6.2mm |
| height | 80mm |
| depth | 86mm |
| color | gray (RAL 7042) |
| flame retardant rating, according to UL 94 | V0 |
| Shell insulation material | polyamide PA, flame retardant |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -20°C ... 65°C |
| ambient temperature (storage/transport) | -25°C ... 80°C |
| Allowable humidity (operating) | 15%... 85% |
Phoenix ETD-BL-1T-ON- 10S-Timer Relay 2917379
