Phoenix ETD-BL-2T-I-230-timer relay 2907713, compact pulse encoder (50 ms-100 h) with adjustable pulse and pause time, wide-range power supply, in-line connection, 1 PDT
| Product Type |
Timer Relay |
| Mode of operation |
100% operating factor |
| mechanical life |
approx. 2x 107times |
| insulation characteristics |
| insulation |
Foundation Isolation |
| Overvoltage Category |
III |
| pollution level |
2 |
| service life, electrical |
approx. 2x 105times, resistive load 1000 VA |
| Rated frequency |
48Hz ... 63Hz |
| Rated power consumption |
2.5 VA (1 W) |
| Test Voltage Relay Coil/Relay Contact |
4 kV |
| Rated insulation voltage |
300V |
| Rated power consumption |
2.5 VA (1 W) |
| Input Voltage Range |
24V AC/DC ... 240V AC/DC -10 % ... +15% |
| temperature coefficient, typical |
≤ 0.01 %/K |
| Recovery Time |
500 ms |
| Function |
lp: cyclic pulse output |
| li: cyclic pulse output |
| Set Range Time |
50 ms ... 100 h (7 time cut-off ranges) |
| basic accuracy |
± 1% (final value) |
| Setting Accuracy |
≤ 5% (final value) |
| repeat accuracy |
≤ 0.5 % ±5 ms |
| control |
| Connection Name |
Non-floating type, terminal A1-B1 |
| control pulse length |
≥ 50 ms (DC) |
| ≥ 100 ms (AC) |
| switching |
| Contact Type |
1 floating transfer contact |
| maximum switching voltage |
250V AC (according to IEC 60664-1) |
| Maximum power rating (resistive load) |
750 VA (3 A/250V AC, module arrangement, spacing ≤ 5mm) |
| 1250 VA (5 A/250V AC, modules not arranged, spacing ≥ 5mm) |
| output fuse |
5 A (fast fuse) |
| Connection Mode |
screw connection |
| stripping length |
8mm |
| Rigid conductor cross section |
0.5 mm² ... 2.5 mm² |
| Flexible Wire Cross Section |
0.5 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG |
20 ... 14 |
| Tightening torque |
1 Nm ... 1 Nm |
| Status Display |
Green LED(POWER) |
| yellow LED (relay activity) |
| width |
17.5mm |
| height |
89.5mm |
| depth |
65.5mm |
| color |
gray (RAL 7042) |
| flame retardant rating, according to UL 94 |
V0 |
| environmental conditions |
| protection class (shell) |
IP40 (housing) |
| protection level (terminal) |
IP20 (terminal) |
| Ambient temperature (operation) |
-25°C ... 55°C |
| -25°C ... 40°C (Compliant with UL 508) |
| ambient temperature (storage/transport) |
-25°C ... 70°C |
| climate class |
3K3 (in accordance with EN 60721) |
| Allowable humidity (operating) |
15%... 85% |
