Phoenix FA MCR-DS-I-I-OLP-digital display meter 2908781, the output circuit power supply digital display meter installed in the control cabinet. HART
| Product Type | Digital Display |
| Product Series | Field Analog |
| configuration | Keyboard |
| Software |
| Function | |
| configuration | Keyboard |
| Software | |
| maximum temperature coefficient | < 0.02 %/K |
| Maximum transmission error | 0.1 % (of terminal value) |
| power supply | |
| Supply Voltage Range | loop power supply, no external power supply required |
| signals: current | |
| current input signal | 4 mA ... 20 mA |
| Maximum current input signal | 200 mA |
| voltage drop | ≤ 1V |
| ≤ 3.9V (with display lamp) | |
| input impedance | 50 Ω. |
| signal: HART | |
| current input signal | up to 4x HART process variables |
| voltage drop | ≤ 1.9V |
| ≤ 4.8V (with display lamp) | |
| input impedance | Rx= 40 Ω/Cx= 2.3 nF |
| signals: current | |
| current output signal | 4 mA ... 20 mA |
| Display Bits | 5 |
| Display | 7-segment LC display with backlight and dot matrix for text/column |
| display value | can be extended |
| signal: HART | |
| current output signal | up to 4x HART process variables |
| Connection Mode | in-line connection |
| stripping length | 9mm |
| Rigid conductor cross section | 0.14 mm² ... 1.5 mm² |
| Flexible Wire Cross Section | 0.14 mm² ... 1.5 mm² |
| Attachable Guide Cross Section AWG | 26 ... 16 |
| Data Communication (Bypass) | |
| Supported Protocols | HART |
| width | 96mm |
| height | 48mm |
| depth | 41.5mm |
| color | light gray (RAL 7035) |
| Shell Material | Aluminum/Polycarbonate |
| environmental conditions | |
| protection level | IP65 (front) |
| IP20 (on the back) | |
| ambient temperature (operation) | -40°C ... 60°C |
| ambient temperature (storage/transport) | -40°C ... 85°C |
| elevation | < 5000 m (above sea level) |
| climate class | conforming to IEC 60654-1, Class B2 |
Phoenix FA MCR-DS-I-I-OLP-Digital Display 2908781
