Phoenix EMUG 45-4REL/KSR-G 24/21-Module can be installed with multiple relay 2943767, relay module, multi-channel, with 4 miniature electromagnetic relays welded to the module for DC voltage, each with indicator light and 1 pair of switching contacts, for medium to large loads, input voltage 24V DC
Product Type
Relay Module
Mode of operation
100% operating factor
mechanical life
about 2x 107 times
insulation characteristics
Overvoltage Category
III
pollution level
2
Data Management Status
Last data maintenance date
19.03.2025
Electrical characteristics
rated conditions
0.5W
test voltage (coil/contact)
2.5 kV AC (50Hz,1 min, coil/contact)
input data
coil side
Rated input voltage UN
24V DC
Input Voltage Range
19.2V DC ... 26.4V DC (20 °C)
drives and functions
monostable
drive (polarity)
polarization
UN
21 mA
Typical Response Time
7 ms
Typical release time
11 ms
protection circuit
Damping diode, polarity protection; Damping diode, polarity protection diode
Operating voltage display
is
Output Data
switching
Contact Type
1 changeover contact
Switch Contact Type
single contact
Contact Material
AgNi
maximum switching voltage
250V AC/DC
limit continuous current
6 A
Maximum impact current
8 A
Maximum power rating (resistive load)
95W (24V DC)
50W (available for 48V DC)
45W (available for 60V DC)
35W (available for 110V DC)
55W (available for 220V DC)
1500 VA (available for 250V AC)
Dimensions
width
45mm
height
60mm
depth
79mm
environment and real conditions
environmental conditions
ambient temperature (operation)
-20°C ... 55°C
Standards and Specifications
Standards/Regulations
IEC 60664
IEC 60664A
DIN VDE 0110
DIN VDE 0109-11, draft
DIN EN 50178/VDE 0160
IEC 60255/DIN VDE 0435 (relevant part)
Installation
Installation Type
DIN rail mounting
Assembly Instructions
no spacing arrangement
Installation position
arbitrary
