Phoenix REL-MR- 24DC/21-21-single relay 2961192, plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24V DC
| Product Type | Single relay |
| Mode of operation | 100% operating factor |
| mechanical life | 3x 107Switch Times |
| insulation characteristics | |
| insulation | Foundation Isolation |
| Overvoltage Category | III |
| pollution level | 3 |
| Data Management Status | |
| Last data maintenance date | 23.06.2025 |
| service life, electrical | See Graph |
| rated conditions | 0.41W |
| test voltage (coil/contact) | 5 kV AC (50 Hz,1 min) |
| test voltage (contact/contact) | 2.5 kV AC (50 Hz,1 min) |
| test voltage (open contact) | 1 kV (50 Hz,1 min) |
| coil side | |
| Rated input voltage UN | 24V DC |
| Input Voltage Range | 15.6V DC ... 59.52V DC |
| drives and functions | monostable |
| drive (polarity) | Inpolarity |
| UN | 17 mA |
| Typical Response Time | 7 ms |
| Typical release time | 3 ms |
| coil resistance | 1440 Ω ± 10% (at 20°C) |
| switching | |
| Contact Type | 2 changeover contacts |
| Switch Contact Type | single contact |
| Contact Material | AgNi |
| maximum switching voltage | 250V AC/DC |
| Minimum Switching Voltage | 5V (10 mA) |
| limit continuous current | 8 A |
| Maximum impact current | 25 A (20 ms) |
| minimum switching current | 10 mA (5 V) |
| Maximum power rating (resistive load) | 192W (24V DC) |
| 96W (48V DC) | |
| 60W (available for 60V DC) | |
| 44W (available for 110V DC) | |
| 60W (available for 220V DC) | |
| 2000 VA (250V AC) | |
| switch capacity | 2 A (24V (DC13)) |
| 0.2 A (250V (DC-13)) | |
| 3 A (24V (AC15)) | |
| 3 A (120V (AC15)) | |
| 3 A (250V (AC15)) | |
| UL 508 Motor Loads | 1/4 HP, 120V AC |
| 1/2 HP, 240V AC | |
| Connection Mode | Plugging/Soldering |
| Dimensional drawing | |
| width | 12.7mm |
| height | 29mm |
| depth | 15.7mm |
| color | white (RAL 9010) |
Phoenix REL-MR- 24DC/21-21-single relay 2961192
