Phoenix REL-MR- 24DC/21HC-single relay 2961312, plug-in miniature power relay with power contacts, suitable for high continuous current, 1 PDT, input voltage 24V DC
Product Type
Single relay
Mode of operation
100% operating factor
mechanical life
3x 107 Switch Times
insulation characteristics
Overvoltage Category
III
pollution level
3
Data Management Status
Last data maintenance date
19.03.2025
Electrical characteristics
service life, electrical
See Graph
rated conditions
0.41W
test voltage (coil/contact)
5 kV AC (50Hz,1 min, coil/contact)
input data
coil side
Rated input voltage UN
24V DC
Input Voltage Range
15.6V DC ... 57.6V DC
drives and functions
monostable
drive (polarity)
Inpolarity
UN
17 mA
Typical Response Time
7 ms
Typical release time
3 ms
coil resistance
1440 Ω ± 10% (at 20°C)
Output Data
switching
Contact Type
1 changeover contact
Switch Contact Type
single contact
Contact Material
AgNi
maximum switching voltage
250V AC/DC
Minimum Switching Voltage
12V (at 10 mA)
limit continuous current
16 A
Maximum impact current
50 A (20 ms)
minimum switching current
10 mA (at 12V)
Maximum power rating (resistive load)
384W (24V DC)
58W (available for 48V DC)
48W (available for 60V DC)
50W (available for 110V DC)
80W (available for 220V DC)
4000 VA (available for 250V AC)
switch capacity
2 A (24V, DC13)
0.2 A (at 110V, DC13)
0.2 A (250V, DC13)
6 A (24V, AC15)
6 A (120V, AC15)
6 A (250V, AC15)
UL 508 Motor Loads
1/2 HP,120V AC (normally open contact)
1 HP, 240V AC (normally open contact)
1/3 HP,120V AC (normally closed contact)
3/4 HP,240V AC (normally closed contact)
1/4 HP,200 ... 250V AC
Connection Data
Connection Mode
Plugging/Soldering
Dimensions
Dimensional drawing
width
12.7mm
height
29mm
depth
15.7mm
Material Specification
