Phoenix FL ISOLATOR 1000-RJ/RJ-Network Isolator 2313915, a passive network isolator for electrical isolation in Ethernet. This protects Ethernet devices from potential differences up to 4 kV. Can be used for transmission rates up to 1 Gbps. Two RJ45 plugs can be connected.
Product Type
Network Isolator
MTBF
5446 years (Telcordia standard, temperature 25°C,21% operation cycle (5 days a week, 8 hours a day))
2959 (Telcordia standard, temperature 40°C,34.25% operation cycle (5 days a week, 12 hours a day))
electrical isolation
Ethernet // Ethernet
insulation voltage input/output
250Vrms
test voltage data interface/data interface
4 kV AC (50 Hz,1 min)
Power
Tightening torque
0.56 Nm ... 0.79 Nm
signal
Ethernet
PROFINET
data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3
serial transmission rate
10/100/1000 Mbps
Connection Mode
RJ45 female connector
Channels
1
Transmission Length
≤ 100 m (total length through both ports (depending on transmission rate and cable used))
data: Ethernet interface, 10/100/1000Base-T(X), compliant with IEEE 802.3
serial transmission rate
10/100/1000 Mbps
Connection Mode
RJ45 female connector
Channels
1
Dimensional drawing
width
22.5mm
height
99mm
depth
92mm
color (shell)
Green (RAL 6021)
Identification Material (Shell)
PA 6.6-FR
meets EN 60068-2-6/IEC 60068-2-6 anti-vibration standards
: 5g,10 ... 150Hz, 2.5 h, XYZ
Conforms to EN 60068-2-27/IEC 60068-2-27 impact resistance standards
: 25g,11 ms, half-sine shock pulse
environmental conditions
protection level
IP20
ambient temperature (operation)
-25°C ... 75°C
ambient temperature (storage/transport)
-25°C ... 85°C
elevation
≤ 5000 m (see manufacturer's statement for high altitude operation for limits)
