Phoenix FTPC 4 1-test plug 3069260, test plug, nominal working voltage: 400V, rated current: 24 A, number of digits: 5, wiring method: screw connection, rated wiring capacity: 2.5 mm2, color: gray
| Product Type |
test plug-in terminal |
| Bits |
5 |
| needle pitch |
8.2mm |
| potential |
5 |
| Rated cross section |
6 mm² |
| test socket torque |
0.5 |
| Connection Mode |
screw connection |
| Considerations |
the wire cross section depends on the cable pin used |
| Flexible Wire Cross Section |
0.5 mm² ... 2.5 mm² |
| Wire Cross Section, Flexible [AWG] |
20 ... 14 (as amended by IEC standards) |
| Nominal current |
24 A |
| Maximum load current |
24 A |
| Rated voltage |
400V |
| Rated cross section |
2.5 mm² |
| color |
gray (RAL 7042) |
| flame retardant rating, according to UL 94 |
V0 |
| insulation material |
PA |
| Application of Static Insulation Materials at Low Temperature |
-60°C |
| insulating materials (DIN EN 60216-1(VDE 0304-21)) |
125°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
130°C |
| railway vehicles (DIN EN 45545-2) R22 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R23 |
HL 1 - HL 3 |
| railway vehicles (DIN EN 45545-2) R24 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R26 |
HL 1 - HL 3 |
| Thermal Release NFPA 130 (ASTM E 1354) |
27,5 MJ/kg |
| Surface Flammability NFPA 130 (ASTM E 162) |
through |
| Smoke specific optical density NFPA 130 (ASTM E 662) |
through |
| Smoke Toxicity NFPA 130 (SMP 800C) |
through |
| Surge Voltage Test |
| Test voltage setpoint |
4.8 kV |
| Results |
has passed the test |
| Temperature rise test |
| Temperature rise requirement test |
temperature rise ≤ 45 K |
| Results |
has passed the test |
| Short-time withstand current 4 mm² |
300 A |
| 500 A |
| 1250 A |
| Results |
has passed the test |
| Power frequency withstand voltage |
| Test voltage setpoint |
1.89 kV |
| Results |
has passed the test |
