Phoenix G 10/3-equipment terminal 2716716, equipment terminal, nominal working voltage: 800V, rated current: 57 A, connection quantity: 6, number of digits: 3, wiring method: screw connection, rated wiring capacity: 10mm2, cross section: 0.5 mm2 -16mm2, installation method: direct screw connection, color: gray
| Product Type |
straight-through terminal |
| Product Series |
G |
| Bits |
3 |
| connection quantity |
6 |
| Rows |
1 |
| potential |
3 |
| insulation characteristics |
| Overvoltage Category |
III |
| pollution level |
3 |
| Rated surge voltage |
8 kV |
| rated conditions |
1.82W |
| the number of connections per layer |
6 |
| Rated cross section |
10 mm² |
| Connection Mode |
screw connection |
| thread |
M4 |
| Tightening torque |
1.5 ... 1.8 Nm |
| stripping length |
12mm |
| plug gauge |
A3 |
| connection meets standards |
IEC 60947-7-1 |
| Rigid conductor cross section |
0.5 mm² ... 16 mm² |
| cross-section AWG |
20 ... 6 (as amended by IEC standards) |
| Flexible Wire Cross Section |
0.5 mm² ... 10 mm² |
| WIRE CROSS SECTION, FLEXIBLE [AWG] |
20 ... 8 (as amended by IEC standards) |
| Flexible conductor cross-section (sleeve without plastic insulation) |
0.5 mm² ... 16 mm² |
| flexible conductor cross-section (sleeve with plastic insulating tube) |
0.5 mm² ... 16 mm² |
| 2 wires of the same cross section, rigid wire |
0.5 mm² ... 6 mm² |
| 2 wires with the same cross section, flexible wire |
0.5 mm² ... 6 mm² |
| 2 wires with the same cross section, flexible, with sleeve but not plastic sleeve |
0.5 mm² ... 6 mm² |
| 2 wires with the same cross section, flexible, with TWIN sleeve and plastic sleeve |
0.5 mm² ... 6 mm² |
| Nominal current |
57 A |
| Maximum load current |
76 A (when connecting wires with a cross-sectional area of 16 mm²) |
| Rated voltage |
800V |
| Rated cross section |
10 mm² |
| Dimensional drawing |
|
| width |
46mm |
| height |
33mm |
| depth |
31mm |
| aperture |
4.2mm |
| color |
gray (RAL 7042) |
| flame retardant rating, according to UL 94 |
V0 |
| Insulation Material Group |
I |
| insulation material |
PA |
| Application of Static Insulation Materials at Low Temperature |
-60°C |
| Insulation Relative Temperature Index (Electrical, UL 746 B) |
130°C |
| railway vehicles (DIN EN 45545-2) R22 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R23 |
HL 1 - HL 3 |
| railway vehicles (DIN EN 45545-2) R24 |
HL 1 - HL 3 |
| Fire protection of railway vehicles (DIN EN 45545-2) R26 |
HL 1 - HL 3 |
| Surface Flammability NFPA 130 (ASTM E 162) |
through |
| Smoke specific optical density NFPA 130 (ASTM E 662) |
through |
| Smoke Toxicity NFPA 130 (SMP 800C) |
through |
