Phoenix PACT RCP-4000A-UIRO-PT-isolation amplifier 2906230, a 4-terminal isolation amplifier with general configuration, adopts switching output and plug-in connection technology for electrical isolation of analog signals. Configuration via DIP switch or software. Plug-in connection technology, custom configuration.
| Product Type | isolation amplifier |
| Overview | |
| Accuracy | 1 |
| signal | |
| signal input (at 50Hz) | 100 mV (1000 A) |
| measurement | |
| Input Number | 1 |
| current transformer | |
| Rated primary current Isn | 4000 A |
| Accuracy | 1 |
| signal | |
| configurable/programmable | is |
| voltage output signal | 0V ... 10V (via DIP switch) |
| 2V ... 10V (via DIP switch) | |
| 0V ... 5V (via DIP switch) | |
| 1V ... 5V (via DIP switch) | |
| 0V ... 10.5V (can be set via software) | |
| Maximum voltage output signal | about 12.3V |
| current output signal | 0 mA ... 20 mA (via DIP switch) |
| 4 mA ... 20 mA (via DIP switch) | |
| 0 mA ... 10 mA (via DIP switch) | |
| 2 mA ... 10 mA (via DIP switch) | |
| 0 mA ... 21 mA (can be set via software) | |
| Maximum current output signal | 24.6 mA |
| load/output load voltage output | ≥ 10 kΩ |
| load/output load current output | ≤ 600 Ω (20 mA) |
| fluctuation | < 20 mVSS |
| < 20 mVSS | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| measuring transmitter end | |
| Connection Mode | in-line connection |
| stripping length | 10mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 26 ... 12 |
| environmental conditions | |
| ambient temperature (operation) | -40°C ... 85°C |
Phoenix PACT RCP-4000A-UIRO-PT-Isolation Amplifier 2906230
