Phoenix TC-MACX-MCR-PTB-power supply and fault information module 2904673, power supply and fault signal module, using screw connection method, only for terminal board, does not include the corresponding DIN rail bus connector
| Product Type | Power Module |
| insulation characteristics | |
| Overvoltage Category | II |
| pollution level | 2 |
| signal | |
| voltage input signal | 19.2V DC ... 30V DC |
| Polarization and Surge Protection | is |
| switching: relay | |
| Contact Type | 1 changeover contact |
| Contact Material | AgSnO, hard gold plating |
| maximum switching voltage | 30V AC/DC (2 A) |
| signal | |
| Maximum current output signal | 2 A (Redundancy Range) |
| output voltage | input voltage -0.7V |
| Connection Mode | screw connection |
| stripping length | 7mm |
| thread | M3 |
| Rigid conductor cross section | 0.2 mm² ... 2.5 mm² |
| Flexible Wire Cross Section | 0.2 mm² ... 2.5 mm² |
| Attachable Guide Cross Section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Status Display | 1 red LED(error) |
| 2 green LEDs (PWR1 and PWR2) |
| Dimensional drawing | |
| width | 17.5mm |
| height | 103.6mm |
| depth | 113.7mm |
| depth NS 35/7,5 | 114.5mm (clip to DIN rail NS 35/7,5 in accordance with EN 60715) |
| color | gray (RAL 7042) |
| flame retardant rating to UL 94 (housing) | V0 (housing) |
| Shell Material | PA 6.6 |
| environmental conditions | |
| protection level | IP20 |
| ambient temperature (operation) | -20°C ... 60°C (only on terminal plates) |
| ambient temperature (storage/transport) | -40°C ... 80°C |
| elevation | ≤ 2000 m |
| Allowable humidity (operating) | 5%... 95% (non-condensing) |
Phoenix TC-MACX-MCR-PTB-Power Supply and Fault Information Module 2904673
